0
What else can I help you with?
How is ultra bts commissioning be done?
There are huge types of BTSs. From 2G to 4G,various products using various methods. Commissioning is a procedure that add/modify different settings of BTS to provide access to its users. its done by Using PC with Access software's. either serial port or Ethernet port of PC used to gain access. But in BTS side it can be different type of connector. Procedure is different with each product.
How many type of transmission card in nokia BTS?
There are two types of transmission cards used in Nokia BTS: Abis Interface Transmission Card (AITC) and Transmission and Protection Unit (TPU) card. These cards are responsible for handling the transmission of data and ensuring connectivity for the base transceiver station.
Full form of BTS?
Bangkok Mass Transit System (BTS)
What is BTS in telecom?
(B)usiness (T)elephone (S)ystems Generall a part of a telco providers, or a stand alone venodr that sells the phone systems and othe ancillary equipment to go with it. Mitel, for example would be BTS Equipment, so would NEC Equipment.. Both are sold by a number of different retailers across the world. In Telecommunication, BTS stands for Base Transceiver Station. They are used as communication nodes in a mobile network and are placed at different location within some defined area where the Network Operator is licensed to operate. BTS are station, usually a room wherein a Rack for Transmitter, Receiver, Power Control device, Analog to Digital equipments, AC for lowering temperature within a room are placed and on the top of the house is placed sectored or omnidirectional antenna. They are communication nodes of a mobile network that relays data from mobile to BSC, which then sends it to the MSC. For BTS rack see the Related Link.
What is combiner in BTS?
In BTS (Base Transceiver Station), a combiner is a device used to combine multiple signals, usually from different transceivers, onto a single transmission line for efficient use of resources and improved network performance. Combiners help prevent interference between signals and optimize the utilization of available frequency spectrum.
What is a BTS?
BTS stands for : Base Transceiver Station. It is situated near the user end at the mobile telecommunication towers.
How many volts does a bts uses?
By BTS, do you mean Base Transceiver Station? Such equipment can be found in cell phone towers. Usually a BTS runs on 48V DC.
What brands of CD tower racks have the best reveiws?
Different brands specialize in different types of CD towers and different materials that these CD towers can be built from. Atlantic and Typhoon brands are some of the best rated and reviewed CD towers offered on the market.
How is ultra bts commissioning be done?
There are huge types of BTSs. From 2G to 4G,various products using various methods. Commissioning is a procedure that add/modify different settings of BTS to provide access to its users. its done by Using PC with Access software's. either serial port or Ethernet port of PC used to gain access. But in BTS side it can be different type of connector. Procedure is different with each product.
What is h difference between 2g bts and 3g bts?
3g BTS is greater than 2g bts. and it is with new technologies.
Difference between indoor bts and outdoor bts?
Indoor BTS: It is placed in a shelter Air-condition is must Very sensitive Outdoor BTS: No shelter required Air-condition is not a must Not very sensitive comparing to indoor bts
What is the power range of BTS?
GSM900 transmitted power from BTS: 39dBm GSM1800 transmitted power from BTS: 36dBm
Are there different Eiffel towers?
no.
How much distance between BTS to BTS?
typically 2km
Why use power interface unit in telecom?
it is a unit in a BTS i.e. base transreciever system..these bts are installed with towers that are used for mobile communication. The piu consists of a power plant and battery bank. power plant has rectifier to convert ac to dc and battery back up is used in case of power failure.
Where you can get IGNOU BTS solved assignments for free?
write a note on different tribal societies of india.
Which mirror you use in solar tower?
there are two types solar updraft towers solar power towers in updraft towers solar thermal collector are used in solar power towers heliostat are used
