3g BTS is greater than 2g bts. and it is with new technologies.
FIU and RRI both are connect to ODU of microwave antenna. The difference is RRI is used in ultra BTS where as FIU is used in Flexi BTS.
the basic difference between nokia ultra&flexibts is that ultra can support only12 trx but flexi bts can support 24 trx. i
typically 2km
Transmission between BTS and BSC.FIFA card contain only TNC male connector.
In manet node Mobility is slow. In Manet no Fixed Infrastructure . In Vanet Node Mobility Very high. In Vanet have Fixed Infrastructure . Ex . BTS
GSM900 transmitted power from BTS: 39dBm GSM1800 transmitted power from BTS: 36dBm
BOIA card is a interface between transmissin card and bb2f, its use for bta login & software downloading boia is a brain of bts hardware cntroled by boia card.
FIU use in Bts for large number of channels
All radio-related functions are performed in BBS the base station controllers (BSCs) and the base transceiver station (BTSs). BASE STATION CONTROLLER (BSC): The BSC provides all the control functions and physical links between the MSC and BTS. It is a high-capacity switch that provides functions such as handover, cell configuration data, and control of radio frequency (RF) power levels in the base transceiver stations. A number of BSCs are served by an MSC. BASE TRANSCEIVER STATION (BTS): The BTS handles the radio interface to the mobile station, the BTS is the radio equipment (transceivers and antennas) needed to service each cell in the network. A group of BTSs are controlled by a BSC.
Yes, BTS is currently the biggest band in the world on Twitter 36.79 million tweets mentioning BTS, and only 23,331 tweets mentioning the Beetles. yay! go BTS!
ummmmmmmmmmmmmmmmmmmmmmmmmmm... you cant get a BTS but you can get BTS merch.