I was told that soon as you plug in the USB DMX hub it goes to USB mode. I am not sure as I have not tried it yet but that is what I was told in the Forums.
Yo change the demo mode in your DMX 2.0 softwear simply press the start/cancel button and the on/off button at the same time.
To change the demo mode in your DMX 2.0 softwear, simply press the start/cancel button together with the on/off button for about 3 seconds.
To turn off the demo mode on a Kenwood DPX 501, press the "Menu" button to access the settings. Use the volume knob or arrow keys to navigate to the "Demo" option. Select it and choose "Off" to disable the demo mode. Finally, press the "Menu" button again to exit the settings.
To exit demo mode on a Pioneer DEH-P6700MP, press and hold the "Function" button until the menu appears. Use the volume knob to navigate to the "Demo" option and select it. Set the demo mode to "Off," then confirm your selection. Afterward, the unit should operate normally without the demo display.
To turn off demo mode on a Sony device, such as a TV, access the settings menu by pressing the "Home" button on your remote. Navigate to "Settings," then look for "Device Preferences" or "System" options. From there, find "Retail Mode" or "Demo Mode" and select "Off." After making this change, exit the menu to save your settings.
To keep demo mode off on a JVC KD-R650 after turning off the ignition, you need to access the settings. Start by pressing the "Menu" button, navigate to the "Demo" option, and select "Off." Make sure to save your settings before exiting the menu. This will ensure that demo mode does not activate when you turn the unit back on.
go to source change the radio to standby mode.. then hold the menu button then scroll to demo mode.. once its there push the volume knob in until it beeps and says demo off. i had the same exact radio and the same exact problem.
To exit demo mode on the JVC KD-A305, turn on the unit and press the "Menu" button. Use the volume knob to navigate to the "Demo" option, then select it. Change the setting to "Off" and confirm your selection. This will disable the demo mode and allow normal operation of the unit.
To exit demo mode on the Kenwood KDC-MP5028, first turn on the unit. Then, press and hold the "Menu" button until the menu options appear. Use the volume knob to scroll to "Demo" and select it. Finally, choose "Off" to disable the demo mode, and then save your settings.
how to take fphg2399mf6 out of demo mode
To shut off the demo mode on a Jensen VM9215BT, press the "Setup" button on the unit or remote control. Navigate to the "Demo" option using the arrow keys and change the setting to "Off." Once you've made the change, exit the setup menu, and the demo mode should be disabled. If needed, consult the user manual for additional details.
its not in the demo