a gauze mat
It is called a crucible.
you put your water in the bursen burner then put in on heat the heat should be moderate to avoid vigorous boiling.Alway take note that you do not make the mouth of the bursen burner to face you put it the opposite side and do not lok in side the bursen burner.
The flame color of a Bunsen burner with sodium glutamate is typically a bright yellow due to the presence of sodium ions in the compound. Sodium compounds are known to produce intense yellow flame colors when burned.
Wait till it cools off, then wipe the outside with a damp cloth. Unless you got chemicals on it, though, you usually don't need to--the flame is above the barrel, and the fuel burns off when you turn off the gas. You could also do the next answer too... - - - - - Put it in the dishwasher.
Porcelain is very heat resistant, so you can put it in a flame and it will remain intact, but it will also get extremely hot. Be careful not to burn yourself.
The mat used to put a Bunsen burner on is called a flame-resistant or heat-resistant mat. It is designed to protect the work surface and prevent accidents from the high heat generated by the Bunsen burner.
A gauze mat is used below bunsen burners as it protects the tripod or surface which the bunsen burner might be on. It is most likely to be made of thick metal threads threaded into a mat or square. It is best if it is not touched during an experiment including a bunsen burner as it probably will result in mild to severe burns.
It is called a crucible.
It gave him the idea to call it the Bunsen because he invented it and so he decided to put his surname as Bunsen and it is a burner so Bunsen Burner
what happens when you put pottery on a bunsen burner
The Bunsen burner goes under a thin, fireproof chemistry table.
in science, you'll put a gauze mat on top of a tripod( a thing like a stand) above a Bunsen burner. when you sit the thing you want to heat on the gauze mat, it will spread the heat across the thing as it is made out of metal.
a tripod is put over the bunsen burner
When iron wool is placed in a Bunsen burner flame, it undergoes a chemical reaction called oxidation. The iron in the wool combines with oxygen from the air to form iron oxide, which produces sparks and a glowing effect.
You open th Bunsen burner. Then you use a metal grabber to grab the copper metal and put it on top of the Bunsen burner's flame. Soon the cooper metal will be kindled.
Used on top of a Bunsen burner so you can heat things. it normally has a gauze mat on it and you put a beaker, evaporating basin etc on top of it to heat.
you put your water in the bursen burner then put in on heat the heat should be moderate to avoid vigorous boiling.Alway take note that you do not make the mouth of the bursen burner to face you put it the opposite side and do not lok in side the bursen burner.