answersLogoWhite

0


Best Answer

probley your fuse on your car/truck is blown to check step one : you find your fuse box. step two: you find the blinker fuse. step 3: pull it out look in it and if you see a crack in the bar across the fuse the fuse is blown. hope this helps

User Avatar

Wiki User

15y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Why do your blinkers not work when your brake lights do work?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Your brake lights and head lights do not work your blinkers and running lights do?

My rear window brake light works, but not my tail light brakes on my 1997 Monte Carlo. What is the problem?


Where is the sensor on the brake pedal I have no brake lights but the blinkers work and all fuses are good?

brake light switch is above the brake pedal under the dash


1995 Pontiac grand amdash lights don't work and blinkers don't and brake lights don't work but the fuses are good?

You need new bulbs


My blinkers on my truck don't work when the lights are on this is for a 1999 suburban what do i do?

so what do i do if my blinkers do not when the lights are on


Why do your blinkers work but not your brake lights?

Blinkers can work without brake lights. Brake lights are activated by a switch that is switched by the brake petal and the turn signals are acivated by your turn signal switch on your steering column. The two are two separate circuits. I suggest you check out the switch on your brake pedal to see if it is working properly. It must have 12 volts applied to one side when it is not acitvated and 12 volts should be on both sides when it is activated. When the 12 volts is on both sides of the brake switch, it should apply 12 volts to your brake lights and then they should come on.


Why won't the brake lights on a trailer work after hooking it up to my 97 Ford Expedition with a tow package?

If the blinkers work then your taillight wiring is bad.


Whats the color wires for the blinker an brake lights?

whats the color circuit for the blinkers an break lights?


Brake lights and blinkers don't work 92 ford crown victora?

Start with the fuses, then check the bulbs, then start tracing wires.


Why will the blinkers on an 81 K-10 pickup work but the brake lights will not?

Check the bulbs. These bulbs are a combination tail light & brake light. Even though the blinkers work, the brake light part might be burnt out. If these are okay, check the brake light switch. It's mounted on the brake pedal. Are the brake lights on all the time or they don't light up at all? if all the bulbs are fine, its more than likely the stop-light switch underneath the brake pedal.


What is wrong with a 1996 Toyota Camry if taillights do not work you have checked all the fuses and replaced the bulbs daytime running lights work blinkers work headlights work brake lights work?

GO AND BUY I NEW light bulb !


You need to know if there is a relay for the brake and blinkers for a 92 s-10 blazer my blinkers and brake lights dont work?

I am currently having the same problem you are having check the fuse to see if it is blown the blinkers and brake lights are on the same fuse my system has a short in it somewhere and is popping the fuses I am in the process of running new wires since the wonderful people at Chevy ran all the wires thru the frame and you can't access them


You have a 1985 Safari the back brake lights and blinkers don't work Any suggestions on what you should check now?

has anyone checked the fuses and bulbs?