To add oil to a Massey Ferguson 165, locate the oil filler cap on the engine's valve cover. Remove the cap and use a funnel to pour in the appropriate type and amount of oil, as specified in the owner's manual. After filling, replace the cap securely and check the oil level using the dipstick to ensure it is within the recommended range. Always check for leaks after adding oil.
in the oil filler hole
The same oil as you put in the engine!
where do u put hydraulic fluid in a Massey Ferguson 275
A MF 231 holds about 9 gallons of hydraulic oil and is added via a plug in top of the transmission housing.
A MF 231 holds about 9 gallons of hydraulic oil and is added via a plug in top of the transmission housing.
On the left side of the gear shifters
Beside the gear shift levers
There is a cap right next to the gear shifters. It's about 1-3/4" dia or so with a hex head on top. The hydraulics share the same fluid as the transmission.
put the stick on the right in the middle and turn the key
Hydraulic fill is on top of the transmission but be sure to remove both drain plugs at the trans and back end as they are connected before refilling.
The same place as a massey165
To add power steering fluid to a Massey Ferguson 165, locate the power steering reservoir, which is usually situated near the front of the tractor, often on the left side of the engine compartment. Remove the cap from the reservoir, and using a funnel, pour in the appropriate power steering fluid until it reaches the recommended level indicated on the dipstick or reservoir markings. Always ensure the tractor is on a level surface for an accurate reading. Replace the cap securely after filling.