The spreader setting for Scotts Southern Turf Builder when using the EZ Broadcast spreader by Republic is 3.5. If you are using the EZ Drop Spreader by Republic the spreader setting is 6.5.
If you are using the Vigoro Ultra Turf Lawn Fertilizer(29-0-4) with the Scotts Standard Broadcast Spreader then the setting would be 5.
The Scotts spreader has a dial on there they call a micrometer. The settings on the dial are tested specifically with their products and their spreader. I'm not sure how they compare as I've never seen the Sears spreader. The Scotts Company's consumer services division keeps a list of many spreader types and can often help with setting the spreader before applying their product. You may want to contact them. Look them up at www.scotts.com.
set on 3.25
You would want to use a spreader setting of 3.5. Go over the entire lawn 1 time.
form_title= Scotts Lawn Service form_header= Keep your lawn looking beautiful with help from the pros! Have you used Scotts Lawn Service in the past?*= () Yes () No Do you have dandelions growing on your lawn?*= () Yes () No What type of service do you need?*= _ [50]
Scotts Lawn Service offers services pertaining to the health of your lawn. They can determine how to make it healthier, greener, and fuller. They are not a lawn mowing service.
Set the Scott's Speedy Green 1000 spreader to the recommended setting for the 20-1-4 Naturlawn nutrient as indicated on the product packaging or by using a calibration test. Apply the fertilizer evenly over your lawn, ensuring to follow all safety and usage instructions provided.
Yes, 24-D is in Scotts Lawn Pro Weed and Feed and Scotts Turf Builder with Plus 2 Weed Control
scotts lawn service Is fully insured according to the information on their website and on the merchant's association website for the area they operate in.
Scotts Lawn service gets mixed reviews because sometimes their products aren't meant for your lawn. You should speak with a professional about what products are best for your area.
A) Adjust the micrometer setting to 2.B) Squeeze the trigger against the handle.C) The calibration line engraved on the top of the shutoff plate should be flush with the back edge of the hopper opening.D) To adjustalignment, use a small wrench or pliers to turn the black calibration screw at the lower end of the control wire leading from the micrometer rate setting barrel.http://www.scotts.com/smg/goART2/InfoHowTo/spreader-settings-for-grass-seed-and-lawn-food/19500090/7200009(MORE)