Supplying power.
Different manufacturers and different vehicles using different wiring systems. There is generally not a standard as there is in domestic power wiring.
Chat with our AI personalities
brown wire is called earth wire .or blue wire with white stripe is for anteena wire ok
i was told by geek squad that it is the blue and white wire. not two wires. single wire that is blue and white striped
normally the blue and red wires are hot white is standaed for nutral,
No, example- If the wire is blue with a white strip, (which is your remote wire for the amp turn-on) the wire is blue, the strip is not the color.
In a Chinese cable with brown, blue, and white wires, the brown wire is typically the live wire, the blue wire is the neutral wire, and the white wire is the earth wire. It is important to double-check with a qualified electrician or follow local regulations to ensure safe wiring practices.
If your are using a wire kit, you need to connect the blue and/or blue/white wire from the harness to the blue/white wire from your radio. Now if you have cut your wires you will have to locate the one wire that will turn on your factory amp.Good Luck!!!!
In a Ford Fiesta, the radio constant 12v+ wire is yellow/red, the ground wire is black/blue, and the illumination wire is blue. For the front speakers, the left front speaker wire (+) is white, the left front speaker wire (-) is white/brown, the right front speaker wire (+) is white/violet, and the right front speaker wire (-) is white/orange. For the rear speakers, the left rear speaker wire (+) is white/green, the left rear speaker wire (-) is brown/yellow, the right rear speaker wire (+) is brown/white, and the right rear speaker wire (-) is brown/blue.
you dont
I am installing a cruise control on a 1997 FORD ESCORT,and need to know where the Black and white wire and the Blue wire are located to the vechicle speed sensor?
To wire a master phone socket (with capacitor) from the pole (usually orange white if not green black or blue pair ) wires go to screw terminals (for NTE5) or pins 2 and 5 doesn't matter which way round. To wire a secondary (no capacitor) NEW WIRE blue/white fleck -- pin 2 white/blue fleck -- pin 5 orange/white fleck -- pin 3 (bell) OLD WIRE blue -- 2 orange -- 5 brown -- 3 (bell)
Blue with White Stripe
To properly wire a ceiling fan with 4 wires, you will need to connect the black wire to the fan's black wire, the white wire to the fan's white wire, the green wire to the fan's green wire, and the blue wire to the fan's blue wire. Make sure to follow the manufacturer's instructions and turn off the power before starting the installation.