4.06(bore)/2=2.03(radius)*2.03=4.1209*3.14159(pi)=12.94617(square inches)*3.48(stroke)=45.0527*8(# cylinders)=360.4216cu.in. Most engine manufacturers round up, so this would be a 361.
4.310
a Chevy 350 bored .060 over would be 360.4 cubic inches
10 degrees with a stock cam
Sounds like a 343 to me. But for parts its a 283 bored 60 over
No a 383 is a 350 with a 400 crank. A 350 bored 60 over is 361 cubes.
a BOSS 414!
A 348 Chevy engine has a stock displacement of 348 cubic inches. When the engine is bored .060 inches over, the displacement increases due to the larger cylinder volume. This increase is approximately 5.1 cubic inches, bringing the total displacement to about 353.1 cubic inches. Therefore, a 348 Chevy bored .060 over is approximately 353.1 cubic inches.
413
The bore adds about 10 cu. inches to make it a 337
A Chevy 327 engine bored 0.060 over is commonly referred to as a "327 small block" with a displacement increase due to the overbore. This modification typically increases the engine's displacement from 327 cubic inches to approximately 350 cubic inches. The term "bored 060" indicates that the cylinder bores have been enlarged by 0.060 inches, enhancing performance and power output.
If my math is correct , just over 362 cubic inches ( 4 inch bore x 3.5 inch stroke , bored .060 inches )
468