0
Add your answer:
Earn +20 pts
What rail car holds the conductor?
The engine
What holds a engine to the car?
Motor/engine mounts. Number of mounts and configuration differs from one vehicle to the next.
Does a1020jd tractor holds about the same amount fluid as a8cylinder car?
No. When you add up the total amount of engine oil, engine coolant, and hydraulic / transmission oil, the tractor has quite a bit more.
What types of replacement parts can be purchased from Autozone Auto Parts car mount?
Price for car mount that holds the engine
Is a damaged brain similar to a damaged car engine?
Not really, the brain holds data thought and the abiltiy to live they are needed more than a car engine. Plus if we lose our brain we die. For a car, losing the engine means you need a replacement.
Is it necessary to loosen the engine mounts when changing an oil pan gasket on a 1996 Nissan 200SX 1.6L engine?
You will have to remove the mounting bracket that holds the engine up. It is more than a motor mount, it is the brace under the car that the engine rests on. For about 80 bucks, you can buy a frame that sits where you hood normally does to hold the engine up when you remove this brace.
What is the water reservoir bottle for?
A water reservoir is to catch excess water in a flowing system. In a car, the bottle holds coolant that overflows from the top of the radiator on the inside when the engine warms up.
What is the name for the cradle that holds a car engine?
K-Frame, Sub Frame, Cross member, Depends on the vehicle.
What does 3.0 L mean on your car engine?
The 3.0L on your car engine gives you an idea that the engine of your car can suck up a total of 3.0L mixture of air and fuel then burns it out as a power of your engine to move your car.
What is the difference between 3.5 engine and 3.0 engine?
"It holds .5 more liters than a 3.0 liter engine, therefore your car will go slower." qouted by Stephen Hawking.
Will your engine be harmed if you dirve your car when the oil is 3qts low?
If the engine holds 5 qts and you are 3 qts low, that leaves 2 qts, yes, you will harm the engine if you run it.
How do you replace the main upstream sensor on a 2001 VW jetta?
It depends on what engine you have. If you have the 2.0L you can get to the sensor from the engine bay. Its on the back side of the engine below the intake. To unhook the wiring you have to jack up the car on the pass. side and unscrew the two nuts that holds up the black plastic cover the houses the conections for both sensors.
