The rear of the car will always go in the direction that you turned the wheel if you are in reverse. It's just like driving forward. If you want to go forward and right, turn the wheel to the right. If you are in reverse and want the rear of the car to move to the right, then turn the wheel to the right.
To answer your question directly, the rear of the car will go to the right.
Turn the steering wheel right to turn right in reverse.
The way i remember it is the word OPPISITE if you turn it right (reverse) it will turn left!! If turning wheel left (reverse) it'll go right!! hope i helped
A vibrating steering wheel while parked in reverse or drive can be caused by several factors, including an improperly balanced or worn-out tire, misaligned wheels, or issues with the suspension system. Additionally, if the engine is idling roughly due to a malfunctioning component, it can transmit vibrations to the steering wheel. It's advisable to have a mechanic inspect the vehicle to diagnose and address the underlying issue.
To unlock the steering wheel, insert the key in the ignition, and turn the wheel hard to the left, and then the right. This will usually unlock it. If it doesn't, remove the steering wheel, and look for the plastic tabs that are sticking. Press down firmly on the tab with a screwdriver, while moving the steering wheel.
If the steering wheel is loose while driving the steering rack may be going bad. A bad steering rack leads to a lot of play on the actual wheel.
Steering wheel placement aims to put the driver closer to the middle of the road. Some countries decided differently WRT which side of the road to drive on. Cars made to be used in right-side-traffic have the steering wheels to the left, while cars made to be used in left side traffic have the steering wheel to the right.
If your vehicle begins to skid, you should turn the steering wheel in the direction you want the front of the vehicle to go. For example, if the rear of your vehicle is sliding to the right, turn the steering wheel to the right. This helps regain traction and control. Avoid oversteering, and gently ease off the accelerator while steering.
Your 4 wheel drive may be engaged. Take out of 4 wheel drive and put it in reverse. Drive the car in reverse while turning the steering wheel all the way from one side to the other until it disengages.
Try turning the steering wheel either to the right or left while attempting to turn the key
Check your power steering pump A: check the front Left wheel bearing
The "clockspring" carries power for steering wheel mounted accessories from the steering column into the steering wheel while at the same time allowing the steering wheel to rotate.
To unlock the steering wheel on a 1994 Corvette, insert the key into the ignition and turn it to the "On" position while gently turning the steering wheel left and right. If the steering wheel is still locked, try jiggling the key slightly as you turn it. This action should release the lock mechanism and allow the steering wheel to move freely. If problems persist, there may be an issue with the ignition switch or steering column that requires further inspection.