0
Add your answer:
Earn +20 pts
What is a crank center on a 93 Plymouth laser?
SENSOR not center. It reads the revolutions of the crank shaft to tell the computer how fast it's spinning.
Why shaft speed calculate in RPM?
You can also relate this to the car crank shaft speed , and it is measured in Revolutions Per minute =RPM's. faster your crank shaft rotates (RPM's), the faster your pistons travel up and down the cylinders, thus the faster your car will go. Hope this was what you were looking for...
Do you need a Crank Shaft Head to put on a Crank Shaft in Lacrosse?
I would recommend that you do put a crank shaft head on a crank shaft. Putting any other type of head on a crank shaft could possibly break the head.
What is a crank in a car?
Crank shaft
What revolutions occur in the movement of a car?
The Crank shaft turns and causes the cam shaft to turn, the pumps to turn, the alternator to turn, the transmission gears to turn, the transmission causes the drive shaft to turn, the drive shaft causes the differential to turn (in rear wheel drive models) this turns the axles and the axles turn the wheels. In a front wheel model, the transmission turns the axles shaft that turns the wheels. In a 4x4 the transmission splits to turn the front drive shaft and the rear drive shaft. (then the differential and the axles etc. The other thing that is counted is the steering wheel but it never really completes a whole revolution.
Where is your crank shaft located on a 2000 ford expedition?
The engine crank shaft is inside the engine
Where is the Crank Sensor in a 2001 Malibu?
The crank sensor on a 2001 Malibu is located on the bottom of the engine near the crank shaft. It monitors the rotation and speed of the crank shaft.
Where is the crank shaft sensor located in a Audi a4?
Where is the crank shaft sensor located in a Audi a6
What is the difference between a 350 Chevy crank shaft and a 400 crank shaft?
400 has a longer stroke
What are the types of crankshaft?
2 types of crank shaft are there 1.same plane 2.cross plane crank shaft in cross plane crank shaft cranks are inclined at 90 degree and in same plane crank shaft cranks are in same plane. thnk u
What does RPM mean in the transportation industry?
RPM stands for revolutions per minute. Its the measurement of how many times the crank shaft makes a full turn in a minute. It can be measured by how many times a cylinder goes up and down in an engine in a minute where one cycle equals a full motion up and down.
How do you take off a crank shaft pulley?
how to get the crank shaft pulley off of a 03 Hyundai elanta GLS
