The Chevrolet equinox front speakers are held in place with two retaining screws. Remove the retaining screws and the wiring harness. The speakers will come out.
To remove the front speakers from a Chevy Celebrity: 1. Take out the screws from the speaker grills, take the grills out. 2. The speaker is held in with screws, remove them. Lift the speakers out of the dash and unplug the wire harness.
Remove the door panels
You have to remove the calipers and brake pads to change the brakes on a Chevy Equinox. There's a how to video included below in the related links section that will show you how to change them.
http://prodactor.blogspot.com/2005/09/removing-door-panel-from-toyota.html
Remove the speaker covers. Each speaker cover is held in place with two retaining screws. Remove the speaker retaining screws. Remove the wiring harness from the back of the speakers. Reverse the process to install the new speakers.
A/C condenser
Begin by removing the dashboard speaker covers on your 1989 Chevy S 10 Blazer. Remove the speaker retaining screws. Remove the speaker wiring harness. The speakers will come out.
Front door speakers - 6.5 rear speakers - 6x9
34MM
6.5" front and rear door speakers
Minimum thickness is stamped into the rotor. Use a wire brush to remove the rust buildup and you'll see the spec.
6.5" round speakers.