Minimum thickness is stamped into the rotor. Use a wire brush to remove the rust buildup and you'll see the spec.
Minimum disc thickness vented front 24.6mm .Minimum disc thickness rear 16.6mm. min pad thickness front & rear 1mm
Minimum thickness is .8898 in.
The minimum front brake rotor thickness is three aids of an inch. When the rotor does not have the minimum thickness the auto mechanic replacing the brakes can not use the rotor.
The minimum thickness number should be cast into the rotor.
Front Rotor Minimum Thickness after machining the rotor is .996
A/C condenser
The minimum wear or discard thickness is cast into either the front or backside of the rotor
no
The minimum brake rotor thickness for the front and back rotors on a 1992 Honda Accord is 21mm. Rotors which are below this thickness will not offer adequate or reliable braking.
The minimum thickness for the front rotors on a 2003 Subaru Baja is 22mm. This is measured by using a caliper across the narrowest point of the rotor.
34MM
The minimum thickness on the front rotors for a 1994 Mustang Cobra?æis .97 inches. The minimum thickness on the rear rotors is .50 inches.?æ