the wiring diagram for a 316 john deere tractor
where is the oil drain plug located on a john deere 316 riding mower?
You can purchase a John Deere 316 tractor online at the official John Deere website. You can also purchase one locally at most Home Depots and Lowe's home improvement stores.
820 lbs, without deck
John Deere all-weather hydrostatic fluid or an equivalent type "F" automatic transmission fluid
(from the John Deere website: www.deere.com)You can order a replacement manual from John Deere:Call: 1-800-522-7448Have the tractor serial number available when you call so they can be sure to send you the correct manual.
You can get an Owners manual for you 316 JD at your local John Deere dealer. In this case you will need your serial # off the tractor and you will need to know if you have a Kohler, Onan P218G, Onan P217G, or a Onan B43E. Many of these dealers will mail you your manual if you don't feel like driving to the store.
I just did this today. Remove the drain plug located on the bottom of the rear axle. The reservoir contains 5 qt's when full. Add transmission fluid to the filler hose located just above the dash under the hood.
Per John Deere operators manual: 312, 314, 316, 317, 300, 140, 120. I have been using my 48 inch deck since 1983. -- Dave
Yes it does. Most of the hoods from the John Deere tractors of that era are interchangeable. Here's a list of the hoods that will fit the 318: 200 series: 200, 208, 210, 212, 214, 216 Early 300 series: 300, 312, 314, 316 Kohler, 317 Late 300 series: 316 Onan, 318, 322, 330, 332 400 Series: 400, 420 The hoods for the 200 and early 300 series mowers are slightly different than the hoods for the late 300 series. They will all fit a 318, but the hood used for the late 300 series uses a different type of headlight lens than the hood on the 200 and early 300 series. The hood for the 200 and early 300's has a lens that just covers the front. The hood on the late 300's wraps around the front. Hope this helps!
30% off of £316 = £221.2 = 30% discount applied to £316 = £316 - (30% * £316) = £316 - (0.30 * £316) = £316 - £94.8 = £221.2
The loaders will fit a variety of tractors, the difference you must know is the attachment pieces. Does it have a belt driven or shaft driven pump? If it is belt driven it is for the 300 series John Deere garden tractors. - 316, 318, 322, and 332. Shaft driven pumps are for the 420 and 430 tractors. Next you need to know what frame you have. There are three different ones. For the 300 series, 420 and 430. Hope that helps...