Remove the kick panel covers, the lower portion of the dash, remove the lower half of the covers on the steering column. You will have to cut about 3 or 4 wire ties. you will need a special tool to remove the bolts from the existing ignition switch, (it looks like a reverse torx screw). To remove the other end of the existing Ignition switch cable you will need a nut driver to remove the connector. Remove the two additional connectors on the outside of the connection. Re-install the additional connectors onto the new switch harness. Connect the adaptor and tighten the bolt. install the switch and tie the harness back into place. replace the cover and Dash panels.
Chat with our AI personalities