0
What else can I help you with?
How do you repair an ignition switch on a 1992 GMC Sierra 1500 pick up truck?
Do you take the steering wheel off to get to the ignition
How do you change the ignition switch on a 1983 GMC sierra 1500 truck?
To change the ignition switch on a 1983 GMC Sierra 1500, first disconnect the battery to ensure safety. Remove the steering column cover by unscrewing the screws, then locate the ignition switch mounted on the steering column. Disconnect the wiring harness from the old switch, unscrew it, and replace it with the new switch, securing it in place. Reconnect the wiring, reassemble the steering column cover, and reconnect the battery to complete the installation.
How doi remove ignition without key from 1986 Toyota pickup truck?
Begin by removing the retaining ring at the top of your 1986 Toyota pickup truck ignition switch. The ignition switch will slide out. Remove the wiring harness from the back of the ignition switch.
How do you replace an ignition switch for a 1977 Chevrolet truck?
n ignition switch on a 1991 Chevrolet astro vanAnswern ignition switch on a 1991 Chevrolet astro van
Wiring diagram for ignition switch for 1974 Chevy truck?
Ignition wiring diagram
Key turn truck on but will not turn truck off?
Probably a bad ignition switch.
How do you change the ignition switch on a 1989 Ford truck?
I just purchase a f150 that needs a new ignition switch and the man at auto zone gave me directions with pictures and diagrams, I hope this is of some use. Good Luck!
Where is oil pressure switch on 2008 Chevy sierra truck?
Need engine size.
How do you put a ignition switch in a gmc truck?
To install an ignition switch in a GMC truck, first disconnect the battery to ensure safety. Remove the steering column cover to access the ignition switch, typically located near the ignition lock cylinder. Unscrew the old switch, disconnect the wiring harness, and then attach the new ignition switch, ensuring all connections are secure. Finally, reassemble the steering column cover and reconnect the battery to test the switch.
How do you remove the ignition switch cylinder to replace it on a 1971 Chevy truck with no key?
With no key you will have to drill out the existing tumbler assembly from the switch in order to unscrew the ignition switch bezel.
Why would my truck not start with aNew starter battery alternator?
check the wiring change the starter relay and clean ignition switch with electicial cleaner.
How do you change error message after oil change for 2002 GMC Sierra?
If you mean the change engine oil light, and if your truck is like mine,then you turn the ignition key to the on position,(don't start truck), and step on the accelerator three times, then turn the key off. The light sould be gone after that.
