0
Remove the dress plate under the steering column. There is a clip there for the shift indicator, if you shift on the column. There are two nuts on studs, one on each side of the column, remove these nuts, and the steering column will drop down. The switch is on top of the column just lower then the fastening bracket. Unplug the wiring, remove the screws that retain the switch, install new one and adjust. Put everything back together.
What else can I help you with?
How do you change the ignition switch on a 1996 GMC Yukon?
howdo you change an ignition switch on a 1996 gmc jimmy howdo you change an ignition switch on a 1996 gmc jimmy
How do you put a ignition switch in a gmc truck?
To install an ignition switch in a GMC truck, first disconnect the battery to ensure safety. Remove the steering column cover to access the ignition switch, typically located near the ignition lock cylinder. Unscrew the old switch, disconnect the wiring harness, and then attach the new ignition switch, ensuring all connections are secure. Finally, reassemble the steering column cover and reconnect the battery to test the switch.
How do you change the ignition switch on a 2004 gmc 1500 sierra truck?
how to remove cover to replace ignition lock cylinder and what type of tools do i need
How do you replace ignition on 2006 GMC Sierra?
To replace the ignition switch on a 2006 GMC Sierra, first disconnect the negative battery cable to ensure safety. Remove the steering column covers by unscrewing the necessary screws, then locate the ignition switch. Disconnect the wiring harness and remove the mounting screws to take out the old switch. Install the new ignition switch by reversing these steps, ensuring everything is securely connected before reconnecting the battery.
How do you change the ignition switch on a 1999 gmc sonoma?
To change the ignition switch on a 1999 GMC Sonoma, start by disconnecting the negative battery cable to ensure safety. Remove the steering column covers by unscrewing the screws that hold them in place. Then, locate the ignition switch, disconnect the wiring harness, and unbolt the switch from its mounting. Finally, replace it with the new switch, reassemble the column, and reconnect the battery.
How do you remove 4x4 switch 2007 gmc envoy?
how do you remove 4x4 switch on a 2007 gmc envoy
Where is the ignition relay on a 1992 GMC G2500 conversion van?
That 92 GMC van doesn't have a relay for ignition. Power for the ignition is supplied from the ignition switch.
How do you install ignition switch 1988 gmc truck?
You need to remove the steering wheel first with a puller. There is a latch you can trip with a small screwdriver that will let the ignition switch slide out. Simply replace the switch and put the steering wheel back on.
How do you change an ignition switch in a 1994 GMC full size?
you have to take the steering wheel off remove the horn assembly and find a pin that holds back the switch.
How do you replace igintion on 2006 GMC Sierra?
To replace the ignition switch on a 2006 GMC Sierra, first disconnect the battery to ensure safety. Remove the steering column cover by unscrewing the screws and gently prying it apart. Then, locate the ignition switch, disconnect the wiring harness, and remove the mounting screws to take out the old switch. Install the new ignition switch by reversing these steps, reconnecting the wiring harness, and ensuring everything is secured before reconnecting the battery.
Where is the ignition switch located on a 1992 GMC Vandura?
The ignition switch on a 1992 GMC Vandura is typically located on the steering column, just behind the ignition lock cylinder where the key is inserted. To access it, you may need to remove the steering column covers. The switch is mounted to the column and connected to the wiring harness that powers the ignition system. Always refer to a repair manual for detailed instructions related to your specific model.
How do you replace a electrical ignition switch on 1997 gmc safari 4.3 verteck?
To replace the electrical ignition switch on a 1997 GMC Safari with a 4.3L engine, first, disconnect the battery to ensure safety. Remove the steering column cover by taking out the screws, and then locate the ignition switch mounted on the steering column. Disconnect the wiring harness and remove the bolts holding the switch in place. Install the new switch, reattach the wiring harness, and put the steering column cover back on before reconnecting the battery.
