Wiki User
∙ 13y agoThe correct setting for both spreaders is 3
Wiki User
∙ 13y agoThe spreader setting for Scotts Southern Turf Builder when using the EZ Broadcast spreader by Republic is 3.5. If you are using the EZ Drop Spreader by Republic the spreader setting is 6.5.
The correct setting for an EZ broadcast spreader by republic is 3. Many persons have used this code and it has worked perfectly for them. Depending on what you are doing you can also use the number 4 setting.
A broadcast spreader is used to spread seed, fertilizer or sand over a large area. It is commonly used on farms and is an alternative to using a drop spreader.
If you are using the Vigoro Ultra Turf Lawn Fertilizer(29-0-4) with the Scotts Standard Broadcast Spreader then the setting would be 5.
I would go with a broadcast spreader and use dry fertilizer , might be safer than using liquid fertilizer with a sprayer.
For a drop spreader 7, broadcast 5
Use number 4.5 to 5.0
You would want to use a spreader setting of 3.5. Go over the entire lawn 1 time.
For the Earthway broadcast spreader, you can set it to a setting of around 3.5 to apply Scotts Turf Builder Plus 2 accurately. It's recommended to start at a lower setting and adjust as needed based on the size of the particles in the fertilizer and the coverage you desire. Always refer to the Scotts Turf Builder packaging for specific application instructions.
the same
Setting for scotts rotary spreader of 13-13-13 fertilizer?
The Scotts spreader has a dial on there they call a micrometer. The settings on the dial are tested specifically with their products and their spreader. I'm not sure how they compare as I've never seen the Sears spreader. The Scotts Company's consumer services division keeps a list of many spreader types and can often help with setting the spreader before applying their product. You may want to contact them. Look them up at www.scotts.com.