0
The recommended setting for a Vigoro 4000 spreader when using CIL Fertilizer is typically around 10 to 12. However, it's best to refer to the specific product label for accurate settings, as different formulations may require adjustments. Always calibrate your spreader for the specific fertilizer and ensure even distribution for optimal results.
What else can I help you with?
What is the scotts standard broadcast spreader setting for vigoro fertilizer?
If you are using the Vigoro Ultra Turf Lawn Fertilizer(29-0-4) with the Scotts Standard Broadcast Spreader then the setting would be 5.
What is the k-gro spreader setting for vigoro fertilizer?
The k-gro spreader setting for Vigoro fertilizer can vary based on the specific type of Vigoro product you are using and the area you wish to cover. Generally, the recommended setting is often found on the fertilizer bag or in the product label instructions. For best results, always refer to the manufacturer's guidelines for the specific Vigoro fertilizer you have. Additionally, adjusting the setting based on your spreader's calibration may be necessary for optimal distribution.
What is vigoro spreader setting when using scotts turf builder 32-0-4?
For applying Scotts Turf Builder 32-0-4 using a Vigoro spreader, the recommended setting is typically between 3 to 4, depending on your specific model and the application rate desired. It's essential to check the spreader calibration chart that comes with your Vigoro spreader for precise settings. Always conduct a test run on a small area to ensure proper distribution and adjust if necessary.
What is the settings EZ drop spreader using vigoro weed and feed?
It's on the bag
What setting should you put 13-13-13 fertilizer on a scotts rotary spreader?
To apply 13-13-13 fertilizer using a Scotts rotary spreader, set the spreader to a setting between 3 and 4, depending on the specific model of the spreader and the application rate recommended on the fertilizer package. It's important to adjust based on the size of your lawn and the desired coverage. Always perform a test run in a small area first to ensure even distribution and avoid over-fertilization.
What is the spreader setting for grub ex when using a sears broadcast spreader?
The recommended setting would be 3
What are the settings for EZ republic spreader for scotts southern lawn?
The spreader setting for Scotts Southern Turf Builder when using the EZ Broadcast spreader by Republic is 3.5. If you are using the EZ Drop Spreader by Republic the spreader setting is 6.5.
What setting is needed to spread 10 lbs of fertilizer per 1000 sq ft with a speedy green broadcast spreader?
To spread 10 lbs of fertilizer per 1000 sq ft with a Speedy Green broadcast spreader, you need to adjust the spreader setting according to the manufacturer's recommendations for the specific fertilizer you are using. Typically, this involves setting the dial to a range between 5 to 8, but it can vary based on the type of fertilizer and its granule size. Always perform a calibration test by measuring the output over a smaller area to ensure you achieve the desired application rate. Additionally, check the spreader's manual for precise settings tailored to different fertilizers.
What is a broadcast spreader used for?
A broadcast spreader is used to spread seed, fertilizer or sand over a large area. It is commonly used on farms and is an alternative to using a drop spreader.
What is the best fertilizer distributing tool?
I would go with a broadcast spreader and use dry fertilizer , might be safer than using liquid fertilizer with a sprayer.
What should the setting be for 13-13-13 fertilizer on a Scott 3000 speedy green broadcast?
For using a Scott 3000 Speedy Green broadcast spreader with 13-13-13 fertilizer, the recommended setting is typically around 4 to 5 on the spreader. However, it's important to check the specific product label for precise instructions, as settings can vary based on the type of granules and the desired application rate. Always calibrate your spreader to ensure even distribution and avoid over-fertilization.
What are the setting for ortho drop spreader?
The settings for an ortho drop spreader typically depend on the type of material being applied, such as fertilizer, seed, or herbicide. Generally, you can adjust the flow rate by turning the dial or lever on the spreader to the recommended setting indicated on the product label. It's important to calibrate the spreader according to the manufacturer's guidelines for even distribution and to avoid over-application. Always check the specific instructions for the material you're using for the best results.
