Wiki User
∙ 10y agoWant this question answered?
Be notified when an answer is posted
setting @6
You would want to use spreader setting 3.25
Conversion Chart for Scott's Easy Green Spreader.
set on 3.25
For a drop spreader 7, broadcast 5
Set the Scott's Speedy Green 1000 spreader to the recommended setting for the 20-1-4 Naturlawn nutrient as indicated on the product packaging or by using a calibration test. Apply the fertilizer evenly over your lawn, ensuring to follow all safety and usage instructions provided.
It really depends on the size of the product that you are putting down. Tiny pieces of per-emergent or pest control product will empty much faster on a setting of say 6 than a larger product like fertilizer. So settings will vary. To effectively and responsibly apply your product I'd suggest that you contact the manufacture of the spreader or the material you are spreading.
A) Adjust the micrometer setting to 2.B) Squeeze the trigger against the handle.C) The calibration line engraved on the top of the shutoff plate should be flush with the back edge of the hopper opening.D) To adjustalignment, use a small wrench or pliers to turn the black calibration screw at the lower end of the control wire leading from the micrometer rate setting barrel.http://www.scotts.com/smg/goART2/InfoHowTo/spreader-settings-for-grass-seed-and-lawn-food/19500090/7200009(MORE)
The recommended setting for ammonium nitrate on a Speedy Green 2000 spreader is typically around 19 to 21. It is always a good idea to refer to the manufacturer's guidelines or consult with a professional to ensure proper application.
To adjust calibration, do the following:A) Adjust the micrometer setting to 11.B) Squeeze the trigger against the handle.C) The calibration line engraved on the top of the shutoff plate should be flush with the back edge of the hopper opening.D) To adjust alignment, use a small wrench or pliers to turn the black calibration screw at the lower end of the control wire leading from the micrometer rate setting barrel.http://www.scotts.com/smg/goART2/InfoHowTo/spreader-settings-for-grass-seed-and-lawn-food/19500090/7200009
Overseeding -- 7 1/2 New Lawn/ Bare spot -- 18 but it would be best to go over the lawn twice at setting 7 1/2 in perpendicular directions.
Set the Ever Green for 6