Use a foam 100mm roller to apply paint. The go over with a good quality paint brush. the idea is to apply the paint evenly .
Semi-gloss paint sometimes has problem sticking to walls that have a higher gloss paint type already on them. Usually, a light sanding and a coat of primer will help. Sometimes, semi-gloss paint peels if it was applied during high-humidity weather, as it doesn't dry all the way through.
Most glues will stick to gloss paint.
No, often high gloss paint is oil based.
Many other companies make a a comparable paint. Ask for there top or second line of high gloss acrylic and you should be satisfied.
Use a foam 100mm roller to apply paint. The go over with a good quality paint brush. the idea is to apply the paint evenly .
Rusty metal primer and paint.
yes you can, prep it first light rub down and apply two coats of the flat paint.
Go over the door lightly with 100 grit sandpaper. Apply a coat of interior/exterior primer. Then you can apply any paint you desire.
Semi-gloss paint sometimes has problem sticking to walls that have a higher gloss paint type already on them. Usually, a light sanding and a coat of primer will help. Sometimes, semi-gloss paint peels if it was applied during high-humidity weather, as it doesn't dry all the way through.
semi gloss
Most glues will stick to gloss paint.
Yes, but you should scuff the gloss coat with sandpaper first, and you might need two coats to kill all the shine.
Can I paint semi gloss over flat paint? Thanks!Barbara Phillips
Generally, a satin or semi-gloss sheen is best for decorative trim. The shinier paint will be a bit easier to apply, be smoother after application and will accent the crown molding. I always paint crown, doors, door trim, and baseboards in high gloss. Here in the south we also use only one color, white. I also use ceiling paint as the primer coat because I paint it (the crown moulding) when I paint the ceiling. Then I apply 1 coat of high gloss on the crown. Then I paint the last coat that has been thinned a little with water (2 tablespoons per cup of paint) This goes on very fast and smoothe and when finished looks like wet vanilla ice cream. When you paint high gloss, be advised that you have to keep a wet leading edge, meaning that if you stop painting and the paint is allowed to dry, it will show where you stopped and then restarted. The same is true for semi gloss and satin.
Semi-gloss paint most times exposes the metal of your car. It can lead to rust and erosion issues. Gloss paint is definitely the way to go.
Windows are one of the easiest things from which to remove paint, regardless of type of paint. Any scraper or razor knife will do the trick with little to no major effort.