The Honda accord rear will bearing should be torqued at 60 pounds. You can ruin the wheel bearing or the wheel seal if you over torque the wheel bearing nut.
The rear hub nut torque settings on a Renault Clio should be set at 175Nm this is what holds the disc in place.
Rear end of the engine - front end of the transmission
The rear axle hub nut should be torqued to 260Nm or 192 lb/ft - this applies also to the front axle hub nut.
For the front I believe a 15/16 socket will work. The rear I used a 7mm Allen wrench
120 nm.
I think it's 210ft-lbs.
citroen saxo 1.4. what is the rear brake hub torque setting?
210 nm
Rear wheel bearing nut tork setting
235nm
47 Ft./Lbs
See the link here:
what is the torque for the rear crankshaft cap and flywheel bolts on a ferguson tea.
Mk1 Focus Euro spec (not US), rear hub nut, the big one in the middle, 29mm socket, torque to 235Nm
The torque settings for the rear hub nut (in the Haynes manual) is 175Nm or 127lb ft.
The Honda accord rear will bearing should be torqued at 60 pounds. You can ruin the wheel bearing or the wheel seal if you over torque the wheel bearing nut.