0
3/16 for a metal line. And rubber brake lines don't have sizes.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
Where can I find a 1994 ford E-350 econoline RV brake line diagram?
It is important to have functioning brakes on a car. A brake line diagram for a 1994 Econoline E-350 RV can be found in its maintenance manual found at auto part stores.
Why is there a coiled brake line on master cylinder?
So the line can flex between the body and the frame/chassis.
How do you get a wiring diagram and a vacuum line diagram for a 1998 3.0 liter Ford Taurus engine compartment?
The vacuum line diagram should be underneath the hood, and the other information can be obtained by either buying a book at your local parts store, or by going to a Public Library.
What would cause brakes to suddenly go out completely?
Any sudden brake loss can be the cause of 1. brake line damage 2. master cylinder disfunction
What causes the left rear brake on a 1994 Chevy silverado to stick after releasing the brake pedal?
most likely a clog in the line or wheel cylinder or maybe a broke spring
What size are the brake lines in a 1998 ford explorer?
3/16 brake line
Where can you find a diagram of front suspension of a 1998 ford windstar?
Autozone.com has an illustrated repair guide for the 1995-1998 Windstar on-line! See link below under "Related Links"
What size brake line is on a 1994 ford ranger?
What size is the steel brake line tubing on a 1994 Ford Ranger
How much will a brake line repair cost on a 1998 Ford Escort?
80 dollars per axle. 320 dollars for all 4 wheels.
Is there a brake line diagram for a 91 Ford Tempo?
Yes, there is a brake line diagram for the 1991 Ford Tempo. It is found in the cars repair or maintenance manual.
Do you have a brake line diagram for a 1993 ford explorer?
No
Why would a ford windstar shake when in idle?
You might want to check your main vacuum line
Brake line size 1998 grand am?
3/16"
How do you replace a brake line on a Ford Escape?
The brake lines on a Ford Escape are replaced by removing the wheel, unscrewing the brake line at the wheel cylinder, and then at the distribution valve. New lines can then be set into place and screwed into the appropriate connector.
Ford Taurus hole in breake line and how to fix it.?
replace the brake line and then bleed the brakes
What size it the brake line on a 1993 Ford Taurus?
It's 3/16 steel line
How do you change the rear wheel brake cylinder on a Ford Windstar?
Replacing the wheel cylinder is just a couple of extra steps to a 'normal' drum brake job.Disconnect the brake line from the wheel cylinderRemove the 2 mounting boltsBleed the brakesNot sure if the cylinder should be 'primed' with fluid - hopefully the part will come with instructions.See "Related Questions" below for more
