most likely a clog in the line or wheel cylinder or maybe a broke spring
The part of the car that turns on the brake lights when you apply pressure to the brake pedal is called the brake switch. Releasing pressure from the pedal causes the brake switch to break its electrical contact, turning off the lights.
Check brake fluid level in master cylinder Make sure parking brake is fully released warning light comes on because there is a fault in the brake system. you need to go to a mechanic before the brakes fail
NO
Any time the brake pedal is hard to press then you need to check and see if the brake booster is functioning properly.
if its burnt out, replace it, if not, check the wireing
what does it mean if my brake light is blinking on and off when its pushed down in my 1999 Chevy silverado
On my 03 Chevy Silverado I just added brake fluid and the message turned off.
a 2003 Chevy silverado taillight bulb uses a 3157
need to find out how to replace a power brake booster in a 2002 Chevy silverado 2500 HD
top of brake pedal
where is it leaking from?
t55
i need a diagram of a 2005 Chevy silverado read drum brake setup
Replace shoes brake 2003 Chevy
the connection between the battery and the brake lights
There are a couple of things that might cause a Chevy Tahoe to lurch forward after releasing the brake. One reason could be that the idle is high. The drive shaft may have to be greased.