Tightening the bolts in the typical order from the middle out, the upper intake bolts torque in first pass at 44 in lbs, the second pass at 88 in lbs.
The lower intake bolts start with 27 in lbsfor the first pass, 106 in lbs for the second pass and 133 in lbs for the last pass.
Chat with our AI personalities
Without looking at the specs, would guess up around 100 foot pounds.
The 2002 Cavalier 2.2 liter engine cylinder head bolt torque specification is 120 pounds. The cylinder head bolts should be torqued in 40 pound intervals.
The check engine light will come on. And u might see a lower mpg rating
32 foot pounds. Check them after it has been run.
Yes you can but, you have to use the flywheel off of the 2002 engine on the 1998 engine other than that you just have to hook up the wiring harness off the 2002 onto the 98.