0
Add your answer:
Earn +20 pts
Does a 1973 dodge dart with a 318 v8 have hydraulic lifters?
yes it has hydraulic lifters.
How do hydraulic lifters work?
a hydraulic fluid pushes parts to do what you want them to
How do you adjust lifters on 88 Chevy s-10 2.5 4 cylinder automatiic transmission?
Tighten rocker arm down to 35 lbs of torque and your all done. These lifters are hydraulic and self adjusting. If you still have valve clatter, you have worn valve train parts.
How do you adjust the valves on a 1984 Ford Ranger 4-wheel drive with a 2.8L engine 5-speed transmission?
This engine probably has hydraulic lifters and no adjustment is required.
What damage will faulty hydraulic lifters cause?
faulty lifters at the best will rattle, at the worst they will not lift the valves properly . valves not opening and closing properly will greatly interfere with the proper running of the engine.can also cause a push rod to come loose and fall into the engine, breaking or bending other parts
Does a 1973 dodge dart with a 318 v8 have hydraulic lifters?
yes it has hydraulic lifters.
Does a 2001 gmc 6 liter have solid hydraulic or roller lifters?
It has hydraulic roller lifters.
What are the reasons for using hydraulic tappets?
The hydraulic lifters do not require adjustment nearly as often as solid lifters.
How many hydraulic lifters does a 1998 ford f150 4.6 engine carry?
16 The 1998 is an 8 cylinder engine. Each cylinder has two lifters. One lifter is for the intake and one lifter is for the exhaust.
1997 pu solid lifters or hydraulic lifters?
solid lifters at a 012-inch clearance
What is the clearance for intake and exhaust valves in a 4.3 vortex motor?
The lifters are hydraulic and require no adjustments. If you have valve clatter you have worn valve train parts.
Are solid or hydraulic lifters stock on 1984 Chevy c10?
Hydraulic lifters would be STOCK from the factory. On the 84 engine.
How do you determine if a 4.3 liter Chevy has hydraulic lifters?
They all had hydraulic lifters. To determine if it has roller lifters, you'd probably need to take off the intake manifold and have a look.
How do you adjust hydraulic lifters on a GM V6 engine?
Typically hydraulic lifters don't get adjusted, they just get tightened to the rocker stud.
Does a 1300vw mk2 golf engine have tap-its or hydraulic lifters?
lifters mate
How do hydraulic lifters work?
a hydraulic fluid pushes parts to do what you want them to
How do you cure hydraulic lifter tapping?
I have a mitsubishi galant 2003 and the hydraulic lifters are tapping. It comes and goes. Should these be replaced? Have the lifters adjusted.
