0
the light is on for a reason first i would have someone hook up to it with a scanner to find out why it is on. the light could come on by a abs sensor going bad, abs moudle going bad, so you need to find out why it is on, then have them take it out with the scanner. abs is a code and fro some reason it has kicked the light on, so to be safe have it checked out.
After the correct repairs have been done, the light will turn itself off after a short drive.
What else can I help you with?
How do you get your abs light to turn off?
The abs light is on because there is a problem with the abs system. Until the problem is fixed the light will remain on. Once the problem is fixed the light will reset itself.
How do you turn off an abs light on an infiniti i-30?
The ABS (Anti-lock Brake System) light is on because the ABS module detects a problem with the system. The ABS light will remain on until the problem is fixed. Once fixed, the ABS light will reset itself.
How do you turn the abs light off in a 2002 Nissan Xterra?
When the ABS light is on it is for a reason, a sensor could be bad, or another major problem. The light wont go off until the problem is corrected or until the light burns out
Will it hurt a car if you wait because the abs and traction off light is on?
NO, you will still have conventional brakes, but no ABS or TC.
How do you reset anti locking brake light on 1994 suburban?
Bring to a shop that has an ABS scanner to determine the problem
Where is the location of the safety fuel shut off on a 1991 Mazda mx6?
The safety fuel shut off location on a 1991 Mazda MX6 is under the dash. It is on the far right side in front of the passenger seat.
Shut off abs light on Lexus es300?
shut off abs light on 1998 es300
Will low oil in Mazda mx6 cause the car to shut off and not restart?
Yes! I got a 1994 MX6 and it would shut down while driving when your oil is low.
Is 1993 Mazda mx6 interchangeable with 1995 Mazda mx6?
most parts are yes. most parts are also interchangeable for ford probes of the same year range (excluding body parts of course --- Many interchangeable parts on 1993 Mazda Mx6: 1993-1996 Mazda 626 1993-1996 Ford Probe some parts off the Mazda MX3 some parts off the 1998-2003 Mazda Protege some parts with 1996 are not compatible due to OBDII legislature, which changed emissions and other changes.
1994 Mazda B2300 ABS light will not go off how do I troubleshoot this?
Did you try disconnecting the positive battery terminal for a minute then reconnecting it? Soemtimes this will reset the computer and the light will go out.
You put 17 alloys on your mx3 and the ABS sensor came on?
When the stock wheels came off there was an ABS sensor that was either tripped or broken. I have the same problem in my '94 Mx6. I would recommend calling around to a few mechanics and explaining the problem to them and getting quotes. If all else fails call a Mazda Dealer for help.
How do you reset abs light 0n a 99 blazer?
The abs light is on because there is a problem with the abs system. The light will not go off until the problem is fixed.
How do you get abs light off in 3 liter jaguar sport?
The abs light is on because there is a problem with the abs system. Until the problem is fixed the light will remain on.
How do Iget the abs and brake light off?
You can pull the relay and/or fuse out and the light will go off. It will also disengage a faulty abs system.
How do you turn off abs light in Audi a6?
only way to turn off an ABS light is to fix the problem in the brake system that originally turned the light on
How do you turn off the abs light on a 2000 buck park ave?
The abs light is on because there is a problem with the abs system. Have the system repaired and the light will clear itself.
Why does the abs light go on and off in a 2000 cavalier?
The abs light flickering on and off is caused by a problem in the abs system. Check the computer coeds to see if a problem shows. Check the abs sensors at each wheel.
