answersLogoWhite

0


Best Answer

The ABS (Anti-lock Brake System) light is on because the ABS module detects a problem with the system. The ABS light will remain on until the problem is fixed. Once fixed, the ABS light will reset itself.

User Avatar

Wiki User

10y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you turn off an abs light on an infiniti i-30?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Art & Architecture

Obd ii code reader provided you the code p1320 amd p0420 for 2000 infiniti i30 how do you know what cylinder has the bad ignition coil?

Pull out eack spark plug individually, the one that's not working will look wet or oilly. It will look wet because the gasoline is not burning completely or at all. That would be the ignition coil to replace.


What is labor cost to install a starter on a 1999 infinity i30?

About 1 hour labor which would be around $75 at a dealer. That is not counting the price of the starter.


Why wont your Infiniti Q45 turn over?

Mine was the starter on 1996 I30. I downloaded the schematic diagrams for the electrical system. I took out fuse #17 (10 Amp) which basically shut down the anti-theft (start) and it still didn't start. After checking that fuse #33 (7.5 Amp) was good, I replaced the starter and it's working fine. The only other thing it could be is the inhibitor switch (Park or Neutral switch) so try both positions and if it doesn't start in either Park or Neutral, it's probably the starter unless you have a stick instead of an automatic. In stick shifts, there is another switch linked to the clutch...that can stop it from starting.


1997 i30 infinity has power starter is good but still wont start or turn over any ideas was told possibly bank sensor is that a part and if so will it cause the car to not start?

Mine was the starter on 1996 I30. I downloaded the schematic diagrams for the electrical system. I took out fuse #17 (10 Amp) which basically shut down the anti-theft (start) and it still didn't start. After checking that fuse #33 (7.5 Amp) was good, I replaced the starter and it's working fine. The only other thing it could be is the inhibitor switch (Park or Neutral switch) so try both positions and if it doesn't start in either Park or Neutral, it's probably the starter unless you have a stick instead of an automatic. In stick shifts, there is another switch linked to the clutch...that can stop it from starting.


How do i replace stripped lugs on infinity i30?

I would take it back to the tire shop that used the air wrench on it and insist they repair it. Those guys are notorious for overtightening with the air wrench, rather than torqueing to the proper specification. Overtighterning also tends to warp the brake rotors, giving you pulsating brakes. Of course, if you overtightened the lugs yourself, ignore this message.

Related questions