0
Stabilise the arc and optimize the operation of the furnace.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
What does a furnace do?
An industrial furnace or direct fired heater, is an equipment used to provide heat for a process or can serve as reactor which provides heats of reaction. Furnace designs vary as to its function, heating duty, type of fuel and method of introducing combustion air.
Can you use ordinary transformer in place of auto transformer?
yes we can place auto transformer in place of original transformer
What is the use of ideal transformer?
Ideal transformer is useful in understanding the practical transformer..i does't have losses...
What is use of metering core in transformer bushing?
It is the current transformer core meant for metering.
What type of transformer used in bed lamps?
If the bed lamps use a low voltage bulb then the type of transformer will be a step down transformer.
Difference between power and furnace transformer?
Power transformer is used step up or down the voltage for the electricity transmission while furnace transformer is used to melt the metals and ores in the electric furnace.
What is the problem of operating a on-load furnace transformer with center tap?
What is the problem of operating a on-load furnace transformer with center tap
What type of transformer is used in a resistance furnace?
A resistance furnace runs on electricity so it will be some type of electrical transformer.
What is the difference between transformer and reactor?
A transformer is composed of two coils and wrapped around a core while a reactor is made up of one coil of wire. A transformer is used to increase or decrease the amount of current while a reactor is used to isolate circuits from a noisy background.
Why does an oil furnace require a step-up transformer?
An oil furnace has a step up transformer to generate a spark to ignite the oil spray at the tip of the nozzle.
Why was power lost to a heat and air thermostat?
The power to the thermostat comes from the transformer in the furnace or air handler whichever you have. 1) the power to the furnace/AH is off, 2) the control fuse that protects the transformer is blown, 3) the transformer is defective, 4) the wire between the furnace and the thermostat got cut.
Replaced the thermostat and the furnace works but wont turn on?
Sounds like you might have a blown transformer, or a blown fuse on the transformer. Hope for the fuse. Its on the Furnace. Be sure your white wire is on the heat side of the thermostat, and the red wire is on the correct terminal also. The transformer can be checked with a voltmeter.
What does a transformer do in a nuclear reactor?
The same thing as in a fossil fueled or hydroelectric power plant.
What are difference between bus reactor and line reactor?
A bus reactors a devise installed in a bus to maintain system voltage when the load on the bus changes by releasing reactive power as usable power to bolster the voltage. A line reactor is placed in line at point of use or just after a transformer to maintain a stable amperage to the user, capacitor.
What size transformer is generally used on a heating only gas furnace?
usually 40 va
What does a furnace do?
An industrial furnace or direct fired heater, is an equipment used to provide heat for a process or can serve as reactor which provides heats of reaction. Furnace designs vary as to its function, heating duty, type of fuel and method of introducing combustion air.
What device does a chemical reaction happen in?
A test tube or a Berzelius or an Erlenmeyer beaker, a special reactor, an oven, a furnace etc.
