0
The normal oil pressure on a GM 305 engine is between 40 and 60 PSI depending on the model year. High oil pressure is needed to allow for proper circulation through the engine.
Wiki User
∙ 9y ago
Add your answer:
Earn +20 pts
What should be the oil pressure on a 1988 GM engine 305 tbi?
The oil pressure may vary depend on mileage. However, typically on a 1988 GM engine should be around 14.25 ohms or more.
Why would the engine have no oil pressure when it is cold?
this is normal, when the car is cold or off. the oil sinks down in to the oil pan.,. If this is a GM engine you may be using an aftermarket oil filter that allows oil to drain back this is not a good thing and can cause engine damage. GM has a TSB on this very problem.
Where is the oil pressure sender on a 2000 gm sierra?
the oil pressure sender on a 2000 gmc is in the back of the eng. top side
Where is the oil pressure relief valve located on 4.3 gm?
It is built into the oil pump/ Part of the oil pump.
What cars use Fram PH30 oil filter?
Gm usually. Older v8s. My camaro. 1988. And old school Gm v8 engine. 305, 350, 327, 454
What is considered low oil pressure on gm 3800 v6 engine?
80lbs
When did GM come out with the 305 engine?
1976
What liter is a gm 305 motor?
5.0
Where is the oil pressure sending unit located on a 3.1 liter GM engine?
by the oil filter, under engine.
How come the oil pressure drops in the red in your 2.8 fiero when idiling?
You may need to change your oil, it may be normal for this vehicle to be in the red at an idle. The engine is not under any pressure. also a very common fault for gm v6 engines loss of oil pressure at idle is often caused by worn out main bearings. i have salvaged many engines by changing them.
What is the direction of the distributor on gm 305 engine?
clockwise
Gaping for spark plugs for 305 gm?
.060
