4.06(bore)/2=2.03(radius)*2.03=4.1209*3.14159(pi)=12.94617(square inches)*3.48(stroke)=45.0527*8(# cylinders)=360.4216cu.in. Most engine manufacturers round up, so this would be a 361.
4.310
a Chevy 350 bored .060 over would be 360.4 cubic inches
10 degrees with a stock cam
Sounds like a 343 to me. But for parts its a 283 bored 60 over
No a 383 is a 350 with a 400 crank. A 350 bored 60 over is 361 cubes.
a BOSS 414!
413
The bore adds about 10 cu. inches to make it a 337
If my math is correct , just over 362 cubic inches ( 4 inch bore x 3.5 inch stroke , bored .060 inches )
468
any Chevy 305 block can be safely bored .060 over. if you have a good block, with thicker cylinder walls, it might be .080 borable.
If my math is correct : using a 4 inch bore and a 3.48 inch stroke , with the cylinders bored .060 , just over ( 360 cubic inches )