0
362 cubic inches
The formula for the area of a cylinder is pi times the radius squared times the stroke of the crank. This is an 8 cylinder engine, so:
3.14159x2.03x2.03x3.5x8=362.493
Engine manufacturers always round up, so the answer to your question is 363.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
What is a Chevy 350 engine bored 060 over called?
It's exactly 360.42 Cubic InchesStock Stroke is 3.48 60 over is 4.060 BoreTo make a 383 stroker you need a 3.75 inch stroke crank, and 4.030 BoreActual displacement is 382.67 Cubic Inches
What is bore of Chevy 454 bored 060 over?
4.310
What does a 351 bored 060 over turn into?
If my math is correct , just over 362 cubic inches ( 4 inch bore x 3.5 inch stroke , bored .060 inches )
What is a 350 Chevy bored 060 over called?
4.06(bore)/2=2.03(radius)*2.03=4.1209*3.14159(pi)=12.94617(square inches)*3.48(stroke)=45.0527*8(# cylinders)=360.4216cu.in. Most engine manufacturers round up, so this would be a 361.
What is bore and stroke of a chevy 496?
4.310 bore X 4.250 stroke -- basically a 454 bored .060 over with a 1/4 inch longer stroke crankshaft as compared to the 4.250 stock bore size and 4.000 inch stroke of a 454. Just as an aside FYI, 427's have the same stock bore size as a 454's but have a 3.760 stroke.
What is a 350 Chevy bored 60 over and stroked 6inches?
There wouldn't be enough deck height to get a 6" stroke. The longest I've seen is around 4", and that requires a special block. A .060" overbore with stock stroke would be about 360 cubes. With 400 crank, it would be 388.
What is the timing for 1973 Chevy 350 bored 060 over?
10 degrees with a stock cam
How many cubic inches is a 350 small block bored 060 over?
If my math is correct : using a 4 inch bore and a 3.48 inch stroke , with the cylinders bored .060 , just over ( 360 cubic inches )
What size is a 350 bored 60 over?
a Chevy 350 bored .060 over would be 360.4 cubic inches
What is a Ford 400 bored 060 over called?
a BOSS 414!
What is max over bore for 400 small block Chevy?
I've heard of going .060" over, but most builders feel .030" over is the limit.
How many cubic inches is 400 small block bored 060 over with 3.75 stroke crank and 6 inch rods?
413 cid
