not present
Online UPS on the other hand uses an Inverter which always on to give sine wave AC in the output socket. The incoming AC is first converted into DC by a transformer to charge the battery as well as to give power to the inverter transformer. The inverter transformer converts the DC to AC continuously to power the load. If power fails, the battery backup circuit switches on and takes the load. Online UPS is more efficient than the Offline UPS and uses a "Constant duty Inverter". It also has a "Static bypass" system that transfers the load to the AC power if the inverter system fails. The advantage of the Online UPS is that, it clean up the AC waveform by converting it into DC then reconverting this DC to fresh AC.
Inverter is the one which converts DC to AC. UPS is the one which provides you uninterrupted power supply. UPS as a system comprises of converter (converts AC to DC), battery, battery charger circuit and an inverter (converts DC to AC). Inverter is part of UPS.
DC voltage is a constant direction of current flow, it can be a constant amount or very (as long as it never changes direction it is DC). AC voltage is in the form of a sine wave (that will change direction of current flow) so at any specific instant of time you could measure a different voltage as it goes through its cycle.
UPS (UNINTERUPTED POWER SUPPLY ) Its charg only AC current (Alternating current). and inverter provide current DC TO AC ( Direct current to Alternating current)
Do a Google Search for UPS (or uninterruptible Power Supply) which will give battery-backed power for about 10-30 mins depending upon your system's current draw and the size of the battery backed unit.
It sounds like the UPS is not working. Check and make sure that the computer is plugged into the UPS and has not been mistakenly plugged into AC power. Have the batteries been looked after since the UPS system has been installed. There should be a battery low light on the unit to tell the status of the batteries. There should also be a low voltage level alarm on the UPS, make sure that the safety warnings have not been shut off. There is definitely a break in voltage on switch over from AC to emergency power hence the computer restart.
A laptop can be powered from the mains AC, without the battery being present. But, the laptop will lose unsaved data should the power suddenly stop - which can also happen with desktops that don't normally have a backup battery.
Kilowatt-hours is kilowatt-hours, regardless of AC or DC. However, UPS's are rated in kilowatts, not kilowatt-hours. If you are talking about battery capacity versus output power, its still different, but in that case you need to consider the efficiency of the UPS. You also need to consider run-time limitations on the UPS, if there happen to be any.
AC current is used nearly everywhere. You will only find DC in special cases, such as solar powered houses, but the utility connection used for backup is still AC.
The smart UPS notifies the computer when power is switched to battery, it also notifies the computer when the battery is almost discharged and the UPS won't be able to keep going. A smart UPS can allow the computer enough time to shut down gracefully, without losing data.A smart UPS can be controlled by software from a computer, a UPS smart have a serial port or USB connections to the PC and a microprocessor on board. The ones are not smart provides backup power in the event that AC fails completely is a heavy box that plugs into a AC outlet and provides one or more outlets for the computer and its peripherals, it has an on/off switch, requires no maintenance, and is very simple to install. A Smart UPS can be controlled by software; a Non-Smart UPS cannot be.A smart UPS has the capability to interface with the computer system which is plugged into it. This is generally done with a serial or USB connection. The smart UPS comes with software which will give the user information on the status of the UPS and batteries and can automatically trigger shutdown sequence whenever it detects a power loss.A SmartUps is just the name of the model of an UPS made by the company APC. They have the SmartUps series with different model numbers: SmartUps 3000, SmartUps 2200XL, etc. This does not imply that the UPS is smarter, or better than any other brand of UPS.
Typical home use UPS devices for computers are plugged into your AC power. There is an input circuit that converts AC to DC and continuously charges the internal batteries in the UPS device. The DC output from the batteries is then converted to AC to power the computer or other device connected to the UPS. There is also a circuit that detects that the house power is no longer functioning and typically sounds an alarm of some sort.
stand by: battery powered circuit is used when AC input fails inline device: battery powered circuit is used continually Verified :"Inline & standby" . A+ test answer 19 June 2011.