UJT is the voltage controlled device.in which only one mejority carriers are responsible for current flowing. UJT is one junction transistor and it is three terminal emitter and two base.
BJT is the current controlled device. in which both mejority and minority carrier are responsiblefor current flowing. this type of transistor consists of two junction and three terminal these are : emitter , base , collector.
UJT is unijunction transistor where as BJT is bi- junction transistor.
BJT is bipolar device and it is a current controlled device
UJT is unipolar device and voltage controlled device
no
The BJT is the bipolar junction transistor, the PCT is the point contact transistor, the UJT is the uni-junction transistor, the SBT is the surface barrier transistor, the FET is the field effect transistor, the GJT is the grown-junction transistor, the AJT is the alloy-junction transistor, and the DFT is the drift field-junction transistor.
Explaine operation of UJT .
by connecting the ujt with proper biasing resistors
BJT is nothing but the addition of two PN junction diodes. There are two types of BJT= P-N-P or N-P-N P-N N-P + or + N-P = P-N-P P-N =N-P-N SCR is a thyristor which is made adding two BJTs. Of course they are made of sillicon. Exempli gratia: P-N-P + + N-P-N = P-N-P-N comparison between scr bjt and mosfet Check the related link for further information.
The On/OFF action in UJT is controlled by emitter current
UJT (UniJunction Transistor): It is a transistor with only one junction and three terminals: an emitter (E) and two bases (B1 and B2). BJT (Bipolar Junction Transistor): This type of transistor consists of two junctions and three terminals, namely Emitter "E", Base "B" and Collector"C". There are two types of BJT, i) PNP and ii) NPN.
You dont. A UJT is a much simple device than either of those BJT's Maybe you want to make a multivibrator out of BJT's?
No. A unijunction transistor (UJT) is entirely different in design and application than a bipolar junction transistor (BJT). The UJT works on the principle of voltage modulation of the effective substrate resistance, while the BJT works on the principle of current amplification from one junction to the other, usually base-emitter to collector-emitter.
The structure of a UJT is quite similar to that of an N-channel JFET. The main difference is that P-type (gate) material surrounds the N-type (channel) material in case of JFET and the gate surface of the JFET is much larger than emitter junction of UJT.
Mainly there are two types of transistors. They are BJT (Bipolar Junction Transistors) and FET(Field Effect Transisters). In BJT, there are two types called PNP and NPN. Actually NPN means a BJT transister.
The BJT is the bipolar junction transistor, the PCT is the point contact transistor, the UJT is the uni-junction transistor, the SBT is the surface barrier transistor, the FET is the field effect transistor, the GJT is the grown-junction transistor, the AJT is the alloy-junction transistor, and the DFT is the drift field-junction transistor.
The bulk resistance between the two bases, which will be different for different types of UJT. Consult the datasheet for the value.
voltageCurrent between the two bases of the UJT sets up a voltage gradient in the semiconductor. When the voltage on the emitter of the UJT rises high enough to forward bias the emitter-base junction at the voltage of the interbase gradient where the emitter is located, the UJT "turns on".
why ujt used as amplifier
Explaine operation of UJT .
the differences between UJT and FET are :- 1. structural :- a. there is only one p-channel in the UJT where as two in JFET b. the p-channel of UJT is more highly doped when compared to p-channel in JFET 2. functional :- UJT always works in forward biased condition (gate is forward biased) where as JFET always work in rverse bias condition (gate is reverse biased)
UJT is known as Uni Junction Transistor