No. If the voltage rating of a fuse is too low for the circuit in which it is fitted then, when the fuse operates (i.e. its link melts), the circuit voltage might maintain the resulting arc within the fuse, and it will fail to protect that circuit.
No
No, the voltage rating should not be exceeded. However, you could use a 250v 10a fuse for a 125v 10a fuse.
It depends on what you are powering with the circuit, but probably not. The 1.5 amp fuse would blow in normal operation of the device.
Use the correct fuse and nothing else.
Yes, fuses of a higher voltage can be used safely. What is not recommended is to use a lower voltage fuse on higher voltages.
No
no.. it could damage your electrical components.
No, the voltage rating should not be exceeded. However, you could use a 250v 10a fuse for a 125v 10a fuse.
It depends on what you are powering with the circuit, but probably not. The 1.5 amp fuse would blow in normal operation of the device.
Use the correct fuse and nothing else.
If it fits you are fine. You are at the same current and the voltage rating is higher.
yes. the 250v just means that's the maximum voltage rating the fuse can handle .. so it can def handle 125v. just not vice versa.
Yes, fuses of a higher voltage can be used safely. What is not recommended is to use a lower voltage fuse on higher voltages.
It is always best to replace with equal or higher rating. However, there may be applications where it would be fine, such as a low voltage circuit.
NO! The use of a higher rated fuse than is recommended can cause the wiring to overheat and cause a fire. Use exactly what is required.
Yes you can. The critical thing is that amps match. All 250 volts says is that it will work up to that value. You wouldn't, for example, use a 20 amp fuse since that could allow higher currents than the microwave could handle. The fuse blows because of excessive current.
Any piece of machinery that is designed to use a fast blow fuse should only use a fast blow fuse. For safety reasons this could save your life instead of taking it.