0
Add your answer:
Earn +20 pts
What do you do if neighbors tv wakes you up at 3 am?
You can either: (1) Call them and tell them to turn it down. (2) Knock on their door and tell them to please turn it off. (3) If they say no, then threaten to call the police. (4) If all fails, JUST STEAL THE DANG TV!
How do you program a dish remote?
Turn on the remote device and hold down the mode button until it starts flashing. Turn on the TV and scan through the device codes slowly. The correct one will flash eight times. The hit the pound key to store the code in the remote.
How do you reduce decibel levels?
On what exactly? if on a stereo or TV, turn it down, or turn down the bass/tremble.
How do you program a Sony TV with the living solutions jumbo remote?
First, turn on the component you want to program the remote for. Next, press the appropriate device button (TV, VCR, or DVD). Hold that button for five seconds. Press "power" on the remote. Your device should turn on. Push either "channel up" or "channel down" until the device turns off. Press "OK" or "enter" and your remote should be programmed.
Why do you get No signal flashing on your TV screen how to correct this?
"No signal" generally means that there is no signal coming from the source device for your TV. For example, your DVD, Blu-Ray player, VCR, cable box, or other source device is still off. You can turn on the source device or change the "Input" or "Input Device" setting on your TV (usually from the remote) to another source device to correct this.
How do you turn up brightness in Netflix?
If you are watching netflix on your iphone or another device just goto the settings on that device and turn up the brightness on there or if you are watching it on your tv goto the tv menu and turn up the brightness and the same with a laptop etc.
Codes for a living solutions remote model atc-1311?
Turn on the component you wish to sync to your universal remote--your television, DVD player, VCR or stereo.Point the remote at the device you are programming and press the corresponding device button on the remote. These buttons are labeled "TV," "VCR", "DVD," etc. Hold the device button for three to five seconds.Push the power button on the remote. This should turn on the device that you are syncing.Push the "Channel Up" or "Channel Down" button on your remote gradually until the device that you are programming shuts off.Press "OK" or "Enter" on the remote once the synced device turns off.Press the device button for the component you just programmed, and hit the power button while pointing the remote at the component. If programmed correctly, the device should turn on, and you should be able to control it with your Living Solutions Universal Remote.
Why is your xbox 360 loud?
turn down the volume on tv
Why is MLB TV slow?
Turn down the video quality.
How can you turn tv on at Club Penguin?
use up and down
Why do you get No signal flashing on your screen how to correct this?
"No signal" generally means that there is no signal coming from the source device for your TV. For example, your DVD, Blu-Ray player, VCR, cable box, or other source device is still off. You can turn on the source device or change the "Input" or "Input Device" setting on your TV (usually from the remote) to another source device to correct this.
How do you program a LG TV with a direct TV remote?
the universal code is 1346
