Traverse survey can change to any shape which accommodate a great deal of different terrain while Triangulation survey is fixed to use of triangles
The aim of traverse in surveying is to establish control points and measure distances and directions between them in order to create an accurate map or plan of the area being surveyed. Traversing is used to ensure that the survey measurements are reliable and allow for accurate positioning of features on the ground.
Traversing is the process of measuring the length and direction (bearing) of the sides of a traverse. A traverse is a series of successive straight lines that are connected. They can be closed or open. A closed traverse can be easily checked for accuracy because they either A. begin and end at the same point or B. Begin and end at known points, provided both the starting and finishing point use the same coordinate system. The boundary lines of a piece of property are a good example of a closed traverse. An open traverse can not be checked for accuracy and are normally used for exploratory purposes.
Triangulation in accreditation surveys involves using multiple sources of evidence to validate the accuracy and reliability of information collected during the survey process. It helps ensure that the accreditation decision is based on a comprehensive and well-rounded assessment of the organization being evaluated.
A primary survey is conducted initially to assess and address life-threatening conditions such as airway obstruction or severe bleeding. A secondary survey is performed after the primary survey to gather more detailed information about the patient's injuries or conditions and provide further medical care as needed.
Allows for mapping without the need for specialized instruments. Can be used to quickly establish control points for larger surveys. Provides a visual representation of the surveyed area for easy interpretation by surveyors.
Traversing survey involves measuring distances and angles between survey points to establish control networks, typically using linear measurements and compass or theodolite readings. Triangulation survey, on the other hand, relies on the principle of triangulation to determine the positions of points by measuring the angles of a triangle formed by sighting distant landmarks. Triangulation surveys are more accurate over long distances and are commonly used in geodetic surveys, while traversing surveys are more suitable for smaller-scale projects and local mapping.
Traversing and triangulation are both methods used in surveying, each with its own advantages:Advantages of traversing:Flexibility: Traversing allows for irregularly shaped boundaries to be surveyed efficiently.Accuracy: With careful measurement and adjustment, traversing can provide highly accurate results.Control: Traversing can establish control points for subsequent surveys or triangulations.Adaptability: It can be employed in various terrains and environments, making it versatile for different surveying tasks.Advantages of triangulation:Speed: Triangulation can be faster than traversing for surveying large, open areas with few obstacles.Simplicity: It requires fewer measurements and calculations compared to traversing, simplifying the survey process.Long distances: Triangulation is well-suited for covering long distances, particularly in flat or open landscapes.Automation: Modern surveying technologies, such as GPS, can automate triangulation processes, further enhancing efficiency.
difference between survey and experiment
differentiate between field experiment and survey and advantages
The aim of traverse in surveying is to establish control points and measure distances and directions between them in order to create an accurate map or plan of the area being surveyed. Traversing is used to ensure that the survey measurements are reliable and allow for accurate positioning of features on the ground.
Plain surveying means the survey in which earth surface is considered as to be flat or plain i.e. its curvature is ignored. Geodetic survey is the survey in which curvature of the earth is taken into count and then surveying is done.
An audit specifically examines finances, whereas a survey could be about anything, such as people's opinions regarding potato chips.
Traversing is the process of measuring the length and direction (bearing) of the sides of a traverse. A traverse is a series of successive straight lines that are connected. They can be closed or open. A closed traverse can be easily checked for accuracy because they either A. begin and end at the same point or B. Begin and end at known points, provided both the starting and finishing point use the same coordinate system. The boundary lines of a piece of property are a good example of a closed traverse. An open traverse can not be checked for accuracy and are normally used for exploratory purposes.
A sample survey is asked of a limited group of people, while a census is conducted in an attempted to get an answer from all people in a geographical area.
The difference between without prejudice survey and survey on without prejudice basis is without prejudice survey or WP survey means the survey carried out to the third party in order to obtain any damage to them while the survey on WP basis means the survey carried out for investigate the incident on third party. In simple word, the WP survey carried out for Damage to third party while the survey on WP basis carried out in relation to investigation to thisrd party.
A Census is the type of survey for a complete population. A Sample Survey is only a portion of the population which is used to make predictions on the representation of the actual population.
Blocking is more for experimental design while strata is for survey sampling.