0
Density of sand can vary depending on the grain size and moisture content and how tightly it is compacted
If you dont need very accurate densities the following should help
Sand, wet 1922 Sand, wet, packed 2082 Sand, dry 1602 Sand, loose 1442 Sand, rammed 1682 Sand, water filled 1922 Sand with Gravel, dry 1650 Sand with Gravel, wet 2020
density of sand will vary depending upon the condition.that is for wet,dry,gravel..
Wiki User
∙ 10y ago
Add your answer:
Earn +20 pts
Which has a larger density sand or lead?
Lead has a larger density than sand. The density of lead is about 11.3 g/cm^3, while the density of sand is typically around 1.5-2.7 g/cm^3.
How do you find the density of sand?
To find the density of sand, measure the mass of a given volume of sand using a balance, then divide the mass by the volume. The density of sand can vary depending on its composition and particle size, but typically falls between 1.5 to 2.7 grams per cubic centimeter.
What is silica sand density?
The density of silica sand typically ranges from 2.65 to 2.67 grams per cubic centimeter.
How much is 14L of sand in pounds?
To convert 14 liters of sand to pounds, you would need to know the density of the sand. On average, dry sand has a density of about 1,600 kilograms per cubic meter, which is roughly equivalent to 100 pounds per cubic foot. Therefore, 14 liters of sand would weigh around 220 pounds.
Is gold more dense than sand?
Yes, gold is more dense than sand. Gold has a density of around 19.3 g/cm³, while sand typically has a density of about 2.65 g/cm³.
Which has a larger density sand or lead?
Lead has a larger density than sand. The density of lead is about 11.3 g/cm^3, while the density of sand is typically around 1.5-2.7 g/cm^3.
If you add water to sand does the volume density and mass change?
When you add water to sand, the volume and mass of the mixture will increase. The density of the mixture will depend on the ratio of sand to water added, but generally, the density will be lower than that of pure sand due to the lower density of water compared to sand.
What is the population density of Rängs sand?
Rängs sand's population density is 1,451 people per square kilometer.
What is dry density of river sand?
Maximum value of dry density of river sand is 1.7 gm/cc
How many grams of sand in one half of the can of the sand?
Depends on the size of the can and the density of the sand.
What is the density of sand saturated surface dry?
That depends on the type and grade of the sand
How much does a jar full of sand weights?
The weight of a jar full of sand will depend on the size of the jar and the density of the sand. On average, sand has a density of about 1.5 grams per cubic centimeter, so you can estimate the weight by calculating the volume of the jar and multiplying it by the density of the sand.
How do you find the density of sand?
To find the density of sand, measure the mass of a given volume of sand using a balance, then divide the mass by the volume. The density of sand can vary depending on its composition and particle size, but typically falls between 1.5 to 2.7 grams per cubic centimeter.
What is the density of river sand?
Properties of River SandTextural composition(% by weight)Coarse Sand (4.75 - 2.00 mm)6.6Medium Coarse sand (2.00 - 0.425 mm)73.6Fine sand (0.425 - 0.075 mm)19.8
Why does compacted sand have a greater density than loose sand poured into a container What does this mean?
In compacted sand the grains of sand are closer together, meaning there are more grains in a certain volume. This gives a higher value for density.
How would you arrange sand and water and oxygen on the basis of properties like kinetic energy and density?
The order of density is: oxygen, water, sand.
Density of sand in sea water?
the density of the sand doesn't change because density is a measurement of mass in a given space however weight changes. weight is a measurement of gravitational pull on an object
