S-video cables carry two video signals. One carries brightness information (the Luma signal) and the other carries color information (the Chroma signal). Together they deliver a complete color picture. There is no audio carried by the cable, either as a separate signal or imbedded in the video signals. To get audio, another cable or set of cables will be needed. There are some multi-pin connectors that carry not only vide but audio and control as well. The SCART connector which is commonly available in Europe is one such example. This connector can carry a variety of video signals, two channel audio and some control lines as well. Most of the analog multi-pin connectors are being replaced by HDMI, a digital connection that carries all signals in a digital encoded format.
Chat with our AI personalities
S-video is a two part video signal carrying luma and chroma signals (Brightness and color signals). There is no audio signal in an S-video connection so the audio will need a separate connection to operate.
Assuming the video cable has the right connectors, probably RCA type (phono connectors) then it can be used for audio signals. In fact, some high end audio interlinking cables use video cable because it is claimed that they work better than standard audio cable. (Note that this is the subject of fierce debate among audiophiles and there is no proof that video cable is an improvement on audio cable for audio signals) Using audio cable for video can also be done up to a point. For short connections, up to a few feet or a couple of metres, an audio cable will work just fine. As the length of the lead increases, the cable will begin to interfere with the video signal and cause loss of definition or ghost images. Substituting the cables will not cause damage to equipment, so it is safe to try it. If it looks or sounds like it works, then it works!
HDMI cables can carry audio but it is in digital format only. Any HDMI connector will be capable of carrying the audio content and any input should be capable of receiving and processing the audio in digital format. There should normally be no need to use analog audio with HDMI but there is one notable exception. HDMI shares the same video interface format as DVI, the digital display output used on computers. However, DVI does not support audio so a cable that links a DVI output to an HDMI input will not carry audio. For this reason, many new televisions have at least one HDMI input that also has an analog audio input associated with the HDMI port. This is specifically provided to cater for DVI + analog audio as delivered by many computers.
A balanced coaxial cable
No, but the HDMI cable also carries AUDIO.