A ,38 Special CARTRIDGE will leave a fair bit of residue- due to the gap between the cylinder and barrel of a revolver (MOST .38 Specials are revolvers) The BULLET is the part of a cartridge that comes out of the barrel- they are solid metal, so do not create gunpowder residue.
Does crack cocain leave a residue
It can, the cheaper electrical tapes leave more residue than the better quality brands such as 3M. The longer you leave it on the more residue it leaves behind.
A residue is something left over. Fires usually leave a residue of ash.
One way to remove sticky residue left on clothing from removing a price tag is to apply a small amount of rubbing alcohol or vinegar to the residue and gently rub it with a cloth until it comes off. You can also try using a mixture of dish soap and warm water to help break down the residue before washing the clothing as usual.
Soap bars leave residue in your shower because it is not washed away. This residue has nowhere to go if not washed away.
Yes, colloids can leave a residue when filtered. Colloids are larger particles that can be trapped by the filter, resulting in a residue left behind after filtration.
No, evaporating water will not leave any residue like chlorine. Chlorine is a volatile compound that will evaporate along with the water and not leave a residue behind.
The trim kit should not leave any residue that is visible on the outside of the range. If you do have residue, a simple solvent should be able to easily remove any residue you may have problems with. Whirlpool-MK1150XP-30-in-Microwave-Trim-Kit is very well advanced equipment and will not leave glue or any residue on operation.
Yes, ammonia can leave a residue if not properly wiped away. It is important to thoroughly rinse or wipe down surfaces after using ammonia to prevent any residue buildup.
Yes, bleach can leave a residue on glass if not rinsed off thoroughly. It is important to rinse glassware well after cleaning with bleach to prevent any residue from forming.
yes.