Because she just has to stand there, hold the light bulb, and wait for the world to revolve around her..........
It is a source of light only.
An incandescent bulb is 96% efficient as a heater, and 4% efficient as a source of light. A fluorescent bulb is only 60% efficient as a heater, and 40% efficient as a source of light. An LED bulb is only 10-20% efficient as a heater, and 80-90% efficient as a source of light (but that light is usually unidirectionally directed... harder to do diffuse lighting with them).
(Another possibility is: Bulb lights up and motor does not spin.)The result all depends on the relative resistance of the bulb and the motor, becausethat determines how much of the supply voltage appears across the light bulb, andhow much across the motor.That's one of the big problems with a series circuit: The performance of one devicedepends on the characteristics of the other devices in the same circuit. If you turnthe light off, the motor can't run at all. If the load on the motor changes, then thelight bulb flickers. And if you change the light bulb and put in one with a differentresistance, then the strength of the motor changes.
Yes he did, Only at least he did his first one.
No, only the resistance of the filament counts (normally marked as "wattage" on the bulb).
There is no light bulb in that can be changed, you have to change the entire panel. Only the agents carry the panel.
Only two, as long as the light bulb has a hole, large enough for them to enter!
Only one! But the light bulb really has to want to change!Just one if they prescribe the correct medication for "Light Production Deficit Disorder."
It only takes one but the lightbulb has to want to change.
only one cuz she is very clever!
well it depends on what kind of light bulb you have if you have a small one it's easier to change it then the big ones! :) Hope im right well I know im right and im only 11!
I would hope it would only take one
One if it is a smart mouse.It only takes 2 to screw in a bulb, it's just a matter of getting in there.
It only takes two but i am still trying to figure out how they got in there.
Only one, if it was Harry Houdini and then he would have changed it into an elephant.
Only when it has power.
Access the back of the light from the engine compartment. Turn the bulb socket holder counter clockwise to remove. Note: If using Halogen replacement bulb, handle the bulb by the holder only, oils from your skin on lamp will cause bulb to burn out quickly.