It depends. Has the magazine plug been removed? Remove the forearm and the barrel. The magazine may have a wood or plastic plug in it. If the plug has not been cut, then only two standard size shells should fit, along with one in the chamber; This would limit the gun to only three shots as allowed for waterfowl hunting. With the plug removed, the gun should handle four shells in the magazine and one in the chamber. Magnum model receivers have extra room if using only 2/3/4 shells. If the magazine tube has no plug and you can load only three shells, check the spring and possibly replace if needed. There is one other possibility and that is if you have a three shot model made prior to the 1950's. Only the original forearm will indicate this, in which you should only be able to load two in the magazine and possibly have a bad spring as well.
This gun should be cleaned completely to give it the smooth action it needs to load the shells from the mag to the chamber,completly disassemble and clean each part. use a good lub on the slideing parts
You need the services of a gunsmith
You need the services of a gunsmith
You need a gunsmith.
3, including the one in the chamber.
Are you talking 2 3/4" magnum shells, or 3" mag shells? Do not put a 3"chamber barrel on a standard receiver. Do not try to load 3" shells in a Light 12. A browning Light twelve can handle the heaviest 2 3/4" loads available. Remember to set the friction ring assembly for "Heavy Loads".
Contact Browning for an owner's manual. The bolt should be forward when loading the magazine, and then operated to load a shell into the chamber.
Your gun needs to visit a gunsmith, It may be dirty, or simply have parts worn or broken. The chamber is what the shell is fired from. You load shells into the magazine.
If a shot has a 3inch chamber it will also shoot - 2 3/4 inch shells..
What is your question? If you want the age of the gun, then please look for a letter above or preceding the 12603, and then re-ask the question.
This switch operates the Magazine cutoff. The cutoff enables the gun to open the chamber and remove the shell to insert a different shell into the chamber, but it is done while the magazine remains loaded. This way, the chamber can be emptied and the extra shells in the magazine will not automatically load. Recommend you use the link below to the Owners Manual for the A500 model. The Magazine Cutoff operations are shown on pages 29 and 30.
Rack the slide to the rear, and visually inspect the chamber to ensure it's clear. Close the slide, ensure that the safety is engaged. On the bottom of the receiver, there is an opening cut out for the loading of your shotgun shells. Load your shotgun shells into the tubular magazine (located under the barrel) via this opening, with the crimped end (the end without any brass) towards the front. When you've loaded as many rounds as you can load, you can rack the slide one time to chamber the first cartridge, and then load one more into the magazine, if you so wish.