0
What else can I help you with?
1000Base-T is a standard for achieving throughouts times faster than Fast Ethernet over copper cable?
10
1000BaseT is a standard for achieving throughputs times faster than Fast Ethernet over copper cable?
1000base-t is a standard for achieving throughputs ____ times faster than fast Ethernet over copper cable== the answer is 10
4.5 sec on fast Ethernet means how long on 10BaseT?
Fast Ethernet is 10 times faster than 10BaseT, so 45 seconds.
What Ethernet use 802.3u?
Ethernet standard 802.3u refers to Fast Ethernet, which supports data transfer rates of 100 Mbps. It primarily uses twisted-pair cabling (such as Category 5 cables) and can also operate over fiber optic connections. Fast Ethernet is widely utilized in local area networks (LANs) to provide faster data transmission compared to the original 10 Mbps Ethernet (802.3).
What is speed of 100 MB Ethernet?
The speed of 100 MB Ethernet, commonly referred to as Fast Ethernet, is 100 megabits per second (Mbps). This standard supports data transmission over twisted-pair cables and fiber optics. Fast Ethernet is widely used in local area networks (LANs) for connecting devices such as computers and switches. It is capable of handling typical network traffic demands but has largely been superseded by faster standards like Gigabit Ethernet.
What are the characteristics of the 100Bae-FX standard?
I believe you mean 100Base-FX. This is so-called Fast Ethernet over two strands of optical fibre. For more about it you might wish to consult the wikipedia Fast Ethernet page.
What is the maximum cable length for a 100 baseT Ethernet?
100BASE-T has a data trasnfer rate up to 100 Mbps. 100BASE-T is based on the older Ethernet standard. Its 10 times faster than Ethernet it is also called Fast Ethernet. The 100BASE-T standard is IEEE 802.3u
How fast is 50 percent faster?
One and a half times faster. If you take half of the current speed and add it to the current speed, that is 50% faster.
Fast Ethernet runs at what speed?
100 Mbps. There are several speeds for Ethernet; the term "Fast Ethernet" is used for the 100 Mbps variety.
Which term best describes an ethernet system operating at 100mbps?
The term that best describes an Ethernet system operating at 100 Mbps is "Fast Ethernet." Fast Ethernet is a standard that allows for data transmission at 100 megabits per second, typically using twisted pair cabling (like Category 5) or fiber optics. It was widely adopted in the late 1990s and serves as an upgrade from the original 10 Mbps Ethernet.
What version of Ethernet runs at 100 Mbps?
The version of Ethernet that runs at 100 Mbps is called Fast Ethernet, specifically defined by the IEEE 802.3u standard. Fast Ethernet can operate over twisted pair cables (using 100BASE-TX) and fiber optic cables (using 100BASE-FX). It was widely adopted in the late 1990s, providing a significant speed improvement over the original 10 Mbps Ethernet.
How do you know that your company network is Ethernet or Fast Ethernet?
arjean
