answersLogoWhite

0

the sewer

User Avatar

Wiki User

15y ago

What else can I help you with?

Continue Learning about General Science

Ways to use crack?

flush it down the toilet.


Why does the water temp change in the shower when you flush a toilet?

The water temp in the shower is determined by the mix of hot and cold water that runs thru the showerhead at any given moment. When we wish to raise the water temp- we simply limit the flow of cold water, thereby slightly changing this mix. When we flush the toilet, its water tank immediately (and automatically) start to refill. Refilling obviously takes (cold) water straight from our home plumbing. If our plumbing consists of narrow pipes (or if its partly clotted), the water which is drawn by the toilet refill process runs at the expense of other water consumers - such as the shower. This, in turn, practically limits the amount of cold water thar runs to the showerhead, hence changing its temp.


What are the different classifications of toilet and their uses?

The flush toiletThe flush toilet, the most common type of toilet found, sends waste through a series of pipes that lead to a sewer system and eventually a waste treatment plant or septic tank.Squat ToiletCommon in Turkish and Japanese households, this toilet looks like a porcelain hole in the floor that individuals have to hover over, with their knees bent in a squat position.UrinalsThis is the type of toilet commonly seen in men's restrooms. It is mounted against the wall and can be a single or a communal urinal.Incinerating ToiletThis is a waterless type of toilet. Instead of using water to flush away waste, it burns excrement and other waste products.Composting ToiletThis type of toilet composts human waste by removing moisture from excrement.Outhouse or Pit ToiletCommonly found at campgrounds or in extremely rural areas, this is a hole dug in the ground with a small structure built around it.PHS


What would cause the water level in toilet bowl to decrease slightly with no flush?

It can happen several ways; Left alone the water will evaporate, The weather outside maybe windy causing a vacuum across the roof vent pipe, using a sink or toilet on a lower level of your home may cause some reduction of the water level... etc.


Is Toilet water clean?

yes,toilet water is clean it is actually the same water you drink........if its flushed No, it have AIDS in it.

Related Questions

Why does toilet water go down but doesn't flush properly?

Toilet water may go down slowly or not flush properly due to clogs in the pipes, a malfunctioning flapper or flush valve, or insufficient water pressure. These issues can prevent the proper flow of water needed to effectively flush the toilet.


Why won't the toilet water go down?

The toilet water may not go down due to a clog in the pipes, a malfunctioning flush mechanism, or a problem with the water level in the tank.


How much water does a low flush toilet save a month?

If the toilet works each time on one flush, they use roughly half the water of a standard toilet. You would then use half as much a month on the toilet. They do not always flush completely on the first flush and the toilet is only a part of the water bill.


Will Emily osment go to college to learn how to flush a toilet ow to flush a toilet?

both


Why won't the toilet flush?

The toilet may not flush due to a clog in the pipes, a malfunctioning flush mechanism, or insufficient water in the tank.


What is water cistern?

A water cistern is the part of a toilet that holds water which is then used to flush the toilet.


Do you flush toilet paper down the toilet"?

Yes, it is generally safe to flush toilet paper down the toilet as it is designed to break down easily in water.


Why does the toilet not flush completely?

The toilet may not flush completely due to a clog in the pipes, a faulty flapper or flush valve, insufficient water pressure, or a problem with the toilet's design.


What should you do when you flush the toilet and the water starts rising?

If the water starts rising after you flush the toilet, you should quickly turn off the water supply to the toilet by twisting the shut-off valve located behind the toilet. This will prevent the toilet from overflowing.


Why does the toilet not flush properly?

The toilet may not flush properly due to clogs in the pipes, a faulty flapper or flush valve, low water level in the tank, or a problem with the water pressure.


What is the purpose of the flush on top of a toilet?

The purpose of the flush on top of a toilet is to release water into the bowl, which helps to remove waste and keep the toilet clean.


What are the steps to replace a Kohler toilet flush valve?

To replace a Kohler toilet flush valve, first turn off the water supply to the toilet. Flush the toilet to empty the tank. Remove the tank lid and disconnect the water supply line. Unscrew and remove the old flush valve. Install the new flush valve according to the manufacturer's instructions. Reconnect the water supply line, turn on the water, and test the flush valve for proper operation.