Heat shrink tubing is available at many hardware stores. I would suggest looking at your local lowes or Home Depot first and then trying smaller hardware stores second only after the bigger chain hardware stores do not have any in stock.
Heat shrink tubing was invented in the 1950s, in the later years, by Raychem Corporation. The head engineer founder was Paul Cook who used radiation chemistry to invent heat shrink tubing.
Heat shrink tubing provides a state of the art method for the application of a tights, protective covering to items that will be subjected to the extrems of heat, corrsion.
The website Heat Shrink offers heat shrink tubing. The company cuts to specifications as well as offering the service to print logos onto the tubing. The website itself seems fairly straightforward to navigate.
An Insulated wire is one which has a coating of Heat Shrink Tubing, usually for safety; and an Uninsulated wire on the other hand does not have a coating of Heat Shrink Tubing.
3/32in or 3mm will do.
A specific timeframe that it will take your heat shrink to shrink is unavailable because it is based on certain variables. The variables are as follows type of tubing, diameter of tubing, or type of material being applied to, etc.
No, What you can do is put a piece of shrink tube into a small amount of petrol for a period of time and observe the effect on the tube
Because most plastic shrink wrap tubing is made of cardboard, they can recycled as paper. Simply place the tubing in a bin that is marked for paper recycling.
IT probably would but you would have to make direct contact which might cause the heat-shrink to shrink unevenly or get flattened. It is usually better to blow hot air at it while you rotate it. A good hair dryer might work equally well. ------ Neither a hair dryer, nor a clothes dryer will work for shrinking most conventional heat shrink tubing. The most common types: PVC and Polyolefin require temperatures of greater than 100C (the boiling point of water). A clothes iron will; however you'll melt the tubing with direct contact, and it will mess up your iron. If you don't own a heat gun, you'll be fine using a cigarette lighter. You can find more information at: http://www.buyheatshrink.com
what wires are they? If they are just regular wires like for lights or something, the best method is to solder them back together with rosin core solder and cover them with heat shrink tubing what wires are they? If they are just regular wires like for lights or something, the best method is to solder them back together with rosin core solder and cover them with heat shrink tubing