Most spring Pellet guns should not be dry-fired. When you shoot a spring powered air gun or rifle, the spring compresses the air in the airtube and the compressed air forces the pellet out of the barrel. The compressed air also slows down the spring piston due to the air being compressed. In this way the piston doesn't slam against the end of the chamber. When you dry-fire the rifle without a pellet in the breech the piston has no resistance in the chamber and slams against the end of the airtube. Eventually it will ruin the air tube and the rifle or gun.
If you dry-fire a C02 gun nothing will happen no damage will occur.
If you are asking about a "springer firing system" The answer is NO do not dryfire it. When you shoot a single cock springer rifle or gun with a pellet in the chamber, there is a moment where the piston actually slows down just before the pellet is fired down the barrel. If you have no pellet in the chamber the piston slams against the end of the chamber and this will eventually ruin the chamber. Dry firing a Co2 gun will not hurt it. You will just waist Co2.
Yes, but it won't damage the gun in any way.
Yes. Recommend using a snap cap.
It depends on the model and the caliber of the Pellet gun.
I think you mean pellet gun. That is a gun that fires a small lead pellet but does not use gun powder. It uses compressed air or compressed gasses to push the pellet.
A pellet gun is not adequate for protection, and will get you arrested.
Any pellet gun should be handled like a real firearm. Yes you can be killed with a pellet gun under the right circumstances.
It all depends on the model and who made the pellet gun. I suggest that you re-post the queston with the model and make of the pellet gun to get an answer.
No. Even if it would fit in the chamber, there is no firing pin on a pellet gun.
Nope. Pellet guns are fairly safe to use.
No. A pellet gun would use compressed air.
Use C02 to propell the pellet