0
What else can I help you with?
Av pencil is 8.7cm long and a screw is 7cm 6mm long how many mm is the pencil?
87 mm.
24.6MM is what size in inches?
1 in = 25.4 mm So 24.6 mm * (1 in / 25.4 mm) = 0.9685 in
What size is 115 mm x 190 mm x 24 millimeters in inches?
dimension 115 mm to cm
The grains of sand in sandstone are up to HOW MANY mm in diameter?
Sand grains are particles that range from 1/16 mm to 2 mm in diameter. Cemented grains of this size compose sandstone.
55cm to inches?
There are 1.81102362 inches in 46 millimeters.46 millimeters x 0.0393700787 inches/1 millimeter = 1.81102362 inches1 millimeter = 0.0393700787 inchesDirect Conversion Formula46 mm*1 in25.4 mm=1.811023622 in
What is the recommended size for a drill bit to use with a 5.5 mm screw?
The recommended size for a drill bit to use with a 5.5 mm screw is typically 5 mm.
What mm size 10G screw?
A size 10G screw typically has a major diameter of around 4.8mm.
Screw size for 32 sony bravia wall mount?
The screw size for the Sony Bravia wall mount is 6X16 MM.
What is the Size of oil pan screw for 2000 Oldsmobile alero?
15 mm
What size drill for 10 mm coach screw?
For a 10 mm coach screw, you typically need to use a drill bit that is slightly smaller than the screw's diameter to create a pilot hole. A 7 mm to 8 mm drill bit is usually recommended for this purpose, depending on the material you are working with. This will allow the screw to grip properly while minimizing the risk of splitting the material. Always check the manufacturer's specifications for the exact size needed.
What size is a number 8 screw in mm measurement?
A number 8 screw typically has a major diameter of approximately 4.2 mm. The precise dimensions can vary slightly depending on the specific type of screw (e.g., wood, machine, or sheet metal), but the general range for a number 8 screw diameter is around 4.2 to 4.5 mm.
What is the hole size for a 6-32 screw?
For a 6-32 screw, the recommended clearance hole size is typically around 0.138 inches (3.51 mm) for standard applications. If you are tapping a hole for a 6-32 screw, you would generally use a drill size of 0.106 inches (2.69 mm) for the tap. Always consider the specific application and material when determining the exact hole size.
What is 200 x 200 screw size?
A 200 x 200 screw size typically refers to a screw with a nominal diameter of 200 mm and a length of 200 mm. However, such large screw dimensions are uncommon in standard fastener applications. More context is needed to determine the specific application or type of screw being referenced, as screw sizes usually follow standard measurements in millimeters or inches for various industries.
What is the drain screw nut size on the oil pan on 3.6 cadillac cts engine?
13 mm
What mm size 6g screw?
A 6g screw is approximately 4.2 mm in diameter. This size is commonly used in various applications, including woodworking and construction. The "g" designates the gauge, which is a standardized measurement for the thickness of screws. Keep in mind that screw lengths can vary, so it's important to check the specific length needed for your project.
What is the diameter of a number 8 size screw?
A number 8 size screw typically has a diameter of approximately 0.164 inches (4.19 mm). This size is commonly used in various applications, including woodworking and metal fastening. The exact diameter can vary slightly based on the specific type and manufacturer of the screw.
What is size of no 14 screw?
A No. 14 screw typically has a diameter of about 0.194 inches (4.93 mm). The length of a No. 14 screw can vary widely, ranging from about 1 inch to several inches, depending on the specific application. This size is commonly used in woodworking and construction projects.
