The ONLY ones I would use are Crosman Pellgun Oil or RWS air gun oil. Any other oil will eat the seals on the airgun. Also put a drop of oil on the tip of the C02 cylinder when you install it. This will blow oil through out the firring system within the gun and lubricate it.
It means it's not powered by electric or CO2 if it is spring powered you have to cock it after each shot
It is a pistol that fires BBs or Pellets that are powered by Air or C02, NOT Gunpowder. Some countries consider them Firearms some do not consider them firearms.
The most powerful air pistol would be a Air Force Talon-p 25 Caliber. This is a PCP class air pistol. The air tank uses 3000 PSI to fire the pistol.
The best full metal blow back CO2 powered airsoft pistol is the U.S. Army Duty Calls Elite 1911 Full Metal GBB Airsoft Pistol. A close second is the 500 FPS Full Metal M87, Sport 301L.
no
The best location to buy such an air powered nailer would be from a company called SENCO, who have a variety of air powered nailer tools. Also, trying out other companies such as Lowes would do no harm.
That would most likely be the Hatsan AT P2 PCP Air Pistol at 870 FPS
Can't do it. The lubricant is mixed in with the refrigerant. Converted to air it would be running dry.
It will shoot pellets or bb's. They normally use an air cartridge.
Toz-35. What else would a Russian use? And an anschuts LP@ in air pistol.
A regular pistol is a firearm. It uses gunpowder to fire a bullet. An air pistol uses compressed air to fire a pellet with less velocity than a firearm.
Do not expect any air pistol to come near advertised speeds. Evanix, FX air guns and others make super powered pcp airguns that can reach into the 600-700 fps area, where as other spring pistols like the browning 800 mag and Diana p5 and lp8 can get around 500 fps.