Its about $550 @ basspro
Depending on condition $300-$450
Invector was Brownings original choke tubes that came out in 1983. Invector Plus came along later for the back bored barrel shotguns. They are not interchangeable. Invector Plus= late model shotgun, Invector = earlier design shotgun. Both are still available for purchase.
The Invector, or "Standard Invector" system" was introduced in 1983. A few years later, the Invector-Plus chokes were introduced to fit the new back-bored shotgun barrels. These two choke systems will not interchange. If you have screw-in chokes in your shotgun barrel, the kind of system you have will be stamped on the barrel near the receiver. You must use the proper choke system for your shotgun.
You will have to call Browning to find out.
0 100-1000 USD and up depending on specifics
Made in 1996
The Invector Plus choke tubes were first introduced in the 1989 Browning Catalog which was published in October 1988. Keep in mind that the Invector was already standard on most shotguns and the Invector Plus was slowing being made available to many models. The Invector Plus choke tube system was available first on BT-99 models and then the BPS and high grade doubles.
Yes, all Browning Invector and invector plus barrels can shoot steel shot.
Need date of mfg, serial number, and condition to price most any firearm.
Browning shotgun. Field Model. Either a 12 gauge or a 28 gauge. Invector-Plus refers to the type of choke tubes it uses.
Best bet is to have it examined by a good gunsmith.